Sheet Metal Work Manufacturing · Oregon
0010 - JELD-WEN Engineering
Klamath Falls, OR · ~36 workers · 5 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
0010 - JELD-WEN Engineering runs at 118% of its industry's injury rate - about level with the typical Sheet Metal Work Manufacturing workplace, earning a grade C.
0010 - JELD-WEN Engineering: 3.9 TCR = 118% of Sheet Metal Work Manufacturing BLS 3.3 · 5y Form 300A (see methodology below)
0010 - JELD-WEN Engineering safety composite
0010 - JELD-WEN Engineering scores strongest on dart rate (safer than 83% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
65/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 3.88 per 100 workers
Safer than 58% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 83% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
0010 - JELD-WEN Engineering: 3.5 → 6.6 TCR
Peak year 2020 @ 6.6 TCR · DART/TCR 0× in 2020
0010 - JELD-WEN Engineering's TCR rose 3.0 from 3.5 in 2016 to 6.6 in 2020. In 2020, DART was 0× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332322 · Klamath Falls, OR ABOVE-IND · SMALL
Grade C · TCR 3.9 · 118% of ind
- DART 0.0 DART
- RANK #8/16
- PHOTO CONTECH SLCMP
- BOOK 5y book
- INJ 4 inj
- SIZE ~36 FTE
Nearest TCR peer: CONTECH SLCMP (0.0 TCR gap)
Read with this employer → · Industry book → · Oregon employers → · Look up another →
0010 - JELD-WEN Engineering in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
0010 - JELD-WEN Engineering
3.9 TCR
- CONTECH SLCMP
CONTECH SLCMP
3.9 TCR
- Tate Access Fl
Tate Access Floors
3.9 TCR
- DAWSON
DAWSON
3.9 TCR
- Production Fab
Production Fabricators, Inc.
3.9 TCR
What this shows 0010 - JELD-WEN Engineering averages 3.9 TCR (118% of the Sheet Metal Work Manufacturing BLS benchmark).
0010 - JELD-WEN Engineering TCR series: 2016=3.5 · 2017=0 · 2018=3.1 · 2019=6.2 · 2020=6.6 · BLS 3.3
Where 0010 - JELD-WEN Engineering falls in its industry
1,158 Sheet Metal Work Manufacturing establishmentsSafer than 58% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Oregon alone (the establishments it most directly competes with for workers and contracts): ranked #8 safest of 16 Sheet Metal Work Manufacturing employers in Oregon.
0010 - JELD-WEN Engineering has fewer employees than the Sheet Metal Work Manufacturing median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 6.6 | 0.0 | 0 | 2 | 0 |
| 2019 | 6.2 | 0.0 | 2 | 0 | 0 |
| 2018 | 3.1 | 0.0 | 1 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 3.5 | 0.0 | 1 | 1 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332322 · OR · Klamath Falls
1,158 Sheet Metal Work Manufacturing employers nationwide with a credible TCR · 8,031 rated employers in Oregon with headcount on file · 112 employers in Klamath Falls, OR · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | CONTECH SLCMP | 3.9 TCR |
| NAICS-TCR | Tate Access Floors | 3.9 TCR |
| NAICS-TCR | DAWSON | 3.9 TCR |
| NAICS-TCR | Production Fabricators, Inc. | 3.9 TCR |
| STATE-SIZE | FREDERICKSON FARMING LLC | 36 FTE |
| STATE-SIZE | 4 B Farms, Inc. | 36 FTE |
| STATE-SIZE | Snow Peak | 36 FTE |
| STATE-SIZE | Bend District Office | 36 FTE |
| CITY-NEAR | Sky Lakes Medical Center, Inc. | 1,480 FTE |
| CITY-NEAR | 0007 - US Products Admin | 631 FTE |
| CITY-NEAR | ED Staub & Sons | 582 FTE |
| CITY-NEAR | Ed Staub & Sons Petroleum Inc. | 548 FTE |
| NAT-TCR | 190 Mcallen, Tx | 3.9 TCR |
| NAT-TCR | Ross store 1245 | 3.9 TCR |
| NAT-TCR | Ross store 500 | 3.9 TCR |
| NAT-TCR | Yusen Logistics (Americas) Inc - Indianapolis | 3.9 TCR |
| NAT-SIZE | Needham Norwood, MA DC 1522 | 36 FTE |
| NAT-SIZE | NJ014 | 36 FTE |
| NAT-SIZE | Tmx2033 - Austin | 36 FTE |
| NAT-SIZE | 159 Boise, Id | 36 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.