Sheet Metal Work Manufacturing · Florida
780 Town & Country Industries
Tampa, FL · ~30 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 11.1
- Avg TCR
- 2.2
- Industry avg
- 0
- Fatalities
The verdict
780 Town & Country Industries runs at 506% of its industry's injury rate - far more dangerous than the typical Sheet Metal Work Manufacturing workplace, earning a grade F.
- F
- Failing Safety Record
- 11.1
- avg TCR · per 100 workers
- 2.2
- industry benchmark (BLS)
- 5
- recordable injuries tracked
Grade compares 780 Town & Country Industries's OSHA Total Case Rate to the BLS industry benchmark across 2 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
780 Town & Country Industries's yearly Total Case Rate, against the 2.2 industry benchmark.
Where 780 Town & Country Industries falls in its industry
1,055 Sheet Metal Work Manufacturing establishmentsSafer than 18% of graded establishments in this industry, whose median TCR is 5.1.
Narrower to Florida alone (the establishments it most directly competes with for workers and contracts): ranked #93 safest of 143 Sheet Metal Work Manufacturing employers in Florida.
780 Town & Country Industries has an average TCR of 11.1, which is 506% of the industry average (2.2) for Sheet Metal Work Manufacturing. This is significantly worse than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for 780 Town & Country Industries
Between 2018 and 2019, 780 Town & Country Industries's Total Case Rate worsened from 8.7 to 13.6 recordable injuries per 100 full-time workers, a 57% increase across 1 year of OSHA reporting.
The safest year on record was 2018, at a TCR of 8.7, while 2019 saw the highest rate, at 13.6, a spread of 5.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, 780 Town & Country Industries recorded 5 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from 780 Town & Country Industries's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 423330 - Sheet Metal Work Manufacturing.
DART Rate, Transparent Calculation (2019)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
3 DART incidents × 200,000 ÷ 44,077 hours worked = 13.61 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| 780 Town & Country Industries (this establishment) | 11.13 | OSHA ITA Form 300A, 2-year avg |
| Wholesale Distribution of Roofing Siding and Insulation Materials industry avg | 2.20 | BLS IIF, NAICS 423330 |
| Florida state avg (all industries) | 4.57 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by 780 Town & Country Industries to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2019: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 13.6 | 13.6 | 3 | 0 | 0 |
| 2018 | 8.7 | 8.7 | 2 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on 780 Town & Country Industries's reported OSHA injury record versus its Sheet Metal Work Manufacturing peers, not a verdict on whether any single site is safe today.
- At 506% of the Sheet Metal Work Manufacturing benchmark, 780 Town & Country Industries reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Sheet Metal Work Manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is 780 Town & Country Industries's safety grade?
How many injuries has 780 Town & Country Industries reported?
Similar Employers
Matched by safety record across the industry and by workforce size within Florida - a different peer set than the category browse links below.
Similar TCR (~11.1)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.