Anodizing metals and metal products for the trade · New Hampshire

AeroDynamics, LLC

Seabrook, NH · ~36 workers · 8 years of OSHA Injury Tracking Application data.

D
Poor Safety Record
4.0
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

AeroDynamics, LLC runs at 122% of its industry's injury rate - more dangerous than the typical Anodizing metals and metal products for the trade workplace, earning a grade D.

AeroDynamics, LLC: 4.0 TCR = 122% of Anodizing metals and metal products for the trade BLS 3.3 · 8y Form 300A (see methodology below)

AeroDynamics, LLC safety composite

AeroDynamics, LLC scores strongest on dart rate (safer than 82% of same-industry peers) and weakest on total case rate (tcr) (safer than 49%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

61/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
D 4.01 per 100 workers

Safer than 49% of industry peers

DART rate
B 0 per 100 workers

Safer than 82% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

AeroDynamics, LLC: 0.0 → 6.5 TCR

Peak year 2023 @ 7.1 TCR · DART/TCR 0× in 2024

AeroDynamics, LLC's TCR rose 6.5 from 0.0 in 2017 to 6.5 in 2024. Peak filing year was 2023 at 7.1 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332813 · Seabrook, NH ABOVE-IND · SMALL

Grade D · TCR 4.0 · 122% of ind

  • DART 0.0 DART
  • RANK P49
  • PHOTO Roy Metal Finishing …
  • BOOK 8y book
  • INJ 7 inj
  • SIZE ~36 FTE

Nearest TCR peer: Roy Metal Finishing Piedmont (0.0 TCR gap)

Read with this employer → · Industry book → · New Hampshire employers → · Look up another →

AeroDynamics, LLC in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows AeroDynamics, LLC averages 4.0 TCR (122% of the Anodizing metals and metal products for the trade BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

AeroDynamics, LLC TCR series: 2017=0 · 2018=4 · 2019=3 · 2020=6.1 · 2021=2.9 · 2022=2.6 · 2023=7.1 · 2024=6.5 · BLS 3.3

Where AeroDynamics, LLC falls in its industry

585 Anodizing metals and metal pro establishments

Safer than 49% of graded establishments in this industry, whose median TCR is 4.0.

More dangerous than peersSafer than peers
AeroDynamics, LLC (36 employees, TCR 4.0) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 4.0 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600 05101520 Average employees Total Case Rate AeroDynamics, LLC
AeroDynamics, LLC (36 employees, TCR 4.0) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 4.0

AeroDynamics, LLC has fewer employees than the Anodizing metals and metal products for median and a higher injury rate than the industry's median TCR of 4.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 6.5 0.0 1 1 0
2023 7.1 7.1 2 0 0
2022 2.6 2.6 0 1 0
2021 2.9 2.9 2 0 0
2020 6.1 3.0 1 1 0
2019 3.0 3.0 1 0 0
2018 4.0 4.0 0 1 0
2017 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332813 · NH · Seabrook

585 Anodizing metals and metal products for the trade employers nationwide with a credible TCR · 2,718 rated employers in New Hampshire with headcount on file · 36 employers in Seabrook, NH · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Roy Metal Finishing Piedmont 4.0 TCR
NAICS-TCR Barden Plater 4.0 TCR
NAICS-TCR LCOA 4.0 TCR
NAICS-TCR Orizon Aerostructures 4.0 TCR
STATE-SIZE VAN BERKUM NURSERY 36 FTE
STATE-SIZE Main Office 36 FTE
STATE-SIZE Trumbull-Nelson Construction Company 36 FTE
STATE-SIZE John L. Carter Sprinkler Co., Inc. 36 FTE
CITY-NEAR US Foods Boston 410 FTE
CITY-NEAR SBK Seabrook 352 FTE
CITY-NEAR WM 1762 343 FTE
CITY-NEAR Market Basket #30 309 FTE
NAT-TCR Vocational services, Inc. Shop #3 4.0 TCR
NAT-TCR Lux Bus America 4.0 TCR
NAT-TCR Fisher Auto Parts - CRYLIL 4.0 TCR
NAT-TCR 1894 LKQ Newnan (GPS) 4.0 TCR
NAT-SIZE Wood & Wood dba SmallCorp 36 FTE
NAT-SIZE Scw Corporation 36 FTE
NAT-SIZE SIERRA 36 FTE
NAT-SIZE B&S Industrial Contractors, Inc. 36 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.