Cut stone products (e.g., blocks, statuary) manufacturing · Indiana

Architectural Stone Fabricator

Bedford, IN · ~21 workers · 7 years of OSHA Injury Tracking Application data.

C
Average Safety Record
2.9
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Architectural Stone Fabricator runs at 88% of its industry's injury rate - about level with the typical Cut stone products (e.g., blocks, statuary) manufacturing workplace, earning a grade C.

C
Average Safety Record
2.9
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
4
recordable injuries tracked

Grade compares Architectural Stone Fabricator's OSHA Total Case Rate of 2.9 to the Cut stone products (e.g., blocks, statuary) manufacturing BLS benchmark of 3.3 (88% of benchmark) across 7 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

Architectural Stone Fabricator's yearly Total Case Rate, against the 3.3 industry benchmark.

-50510 2018201920202021202220232024 03.3 Industry benchmarkArchitectural Stone Fabricator TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 327991.

Where Architectural Stone Fabricator falls in its industry

333 Cut stone products (e.g., bloc establishments

Safer than 74% of graded establishments in this industry, whose median TCR is 5.0.

More dangerous than peersSafer than peers

Narrower to Indiana alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 22 Cut stone products (e.g., bloc employers in Indiana.

Trend analysis for Architectural Stone Fabricator

Between 2018 and 2024, Architectural Stone Fabricator's Total Case Rate improved from 5.1 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 6 years of OSHA reporting.

The safest year on record was 2020, at a TCR of 0.0, while 2019 saw the highest rate, at 9.3, a spread of 9.3 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 7 reporting years, Architectural Stone Fabricator recorded 4 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 4 injuries shown on this page for Architectural Stone Fabricator are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 327991 - Cut stone products (e.g., blocks, statuary) manufacturing.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 33,197 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Architectural Stone Fabricator (this establishment) 2.91 OSHA ITA Form 300A, 7-year avg
Countertops, stone, manufacturing industry avg 3.30 BLS IIF, NAICS 327991
Indiana state avg (all industries) 4.53 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Architectural Stone Fabricator to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.0 0.0 0 0 0
2023 0.0 0.0 0 0 0
2022 0.0 0.0 0 0 0
2021 5.9 0.0 1 0 0
2020 0.0 0.0 0 0 0
2019 9.3 0.0 2 0 0
2018 5.1 5.1 1 0 0

What this grade means for you

Use this grade as a relative read on Architectural Stone Fabricator's reported OSHA injury record, strong versus its Cut stone products (e.g., blocks, statuary) manufacturing peers, but not a guarantee about any single site today.

  • At 88% of the Cut stone products (e.g., blocks, statuary) manufacturing benchmark, Architectural Stone Fabricator reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Cut stone products (e.g., blocks, statuary) manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Architectural Stone Fabricator's safety grade?
Architectural Stone Fabricator has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 2.9 compared to the BLS industry benchmark of 3.3 for Cut stone products (e.g., blocks, statuary) manufacturing.
How many injuries has Architectural Stone Fabricator reported?
Architectural Stone Fabricator has reported 4 total injuries and 0 fatalities across 7 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2019, 2018). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Indiana, and by nearby establishments in Bedford - a different peer set than the category browse links below.

Similar TCR (~2.9)

Similar size (~21 workers)

Nearby in Bedford

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.