Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing · Ohio
AT&F Advanced Metals LLC
Orrville, OH · ~30 workers · 3 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
AT&F Advanced Metals LLC runs at 73% of its industry's injury rate - safer than the typical Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing workplace, earning a grade B.
AT&F Advanced Metals LLC: 2.4 TCR = 73% of Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
AT&F Advanced Metals LLC safety composite
AT&F Advanced Metals LLC scores strongest on dart rate (safer than 81% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
70/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.41 per 100 workers
Safer than 73% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 81% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
AT&F Advanced Metals LLC held a steady TCR band
AT&F Advanced Metals LLC's TCR held near 0.2 from 3.5 in 2022 to 3.7 in 2024. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2022=3.5 · 2023=0.0 · 2024=3.7
OSHA ITA Form 300A scorecard
Establishment book 332313 · Orrville, OH AT/BELOW-IND · SMALL
Grade B · TCR 2.4 · 73% of ind
- DART 0.0 DART
- RANK #14/38
- PHOTO SMI
- BOOK 3y book
- INJ 2 inj
- SIZE ~30 FTE
Nearest TCR peer: SMI (0.0 TCR gap)
Read with this employer → · Industry book → · Ohio employers → · Look up another →
AT&F Advanced Metals LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- SMI
SMI
2.5 TCR
- Forge Racks an
Forge Racks and Dunnage
2.5 TCR
- This site
AT&F Advanced Metals LLC
2.4 TCR
- Shandon Office
Shandon Office
2.4 TCR
- USW - Fremont
USW - Fremont
2.4 TCR
What this shows AT&F Advanced Metals LLC averages 2.4 TCR (73% of the Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS benchmark).
AT&F Advanced Metals LLC TCR series: 2022=3.5 · 2023=0 · 2024=3.7 · BLS 3.3
Where AT&F Advanced Metals LLC falls in its industry
449 Plate work (e.g., bending, cut establishmentsSafer than 73% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #14 safest of 38 Plate work (e.g., bending, cut employers in Ohio.
AT&F Advanced Metals LLC has fewer employees than the Plate work (e.g., bending, cutting, punc median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.7 | 0.0 | 1 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 3.5 | 0.0 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332313 · OH · Orrville
449 Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing employers nationwide with a credible TCR · 22,650 rated employers in Ohio with headcount on file · 58 employers in Orrville, OH · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | SMI | 2.5 TCR |
| NAICS-TCR | Shandon Office | 2.4 TCR |
| NAICS-TCR | USW - Fremont | 2.4 TCR |
| NAICS-TCR | Forge Racks and Dunnage | 2.5 TCR |
| STATE-SIZE | Tuente Farms Inc | 30 FTE |
| STATE-SIZE | Farm 3 | 30 FTE |
| STATE-SIZE | Trillium Farms Layer 6 | 30 FTE |
| STATE-SIZE | Canton Hatchery | 30 FTE |
| CITY-NEAR | The J.M. Smucker Company Corporate Office | 1,798 FTE |
| CITY-NEAR | The Quality Castings Company | 331 FTE |
| CITY-NEAR | The JM Smucker Company Manufacturing Facility | 305 FTE |
| CITY-NEAR | Aultman Orrville | 302 FTE |
| NAT-TCR | USA Philadelphia 6615 Norwitch Dr | 2.4 TCR |
| NAT-TCR | USA Tampa 5309 Airport Service Rd | 2.4 TCR |
| NAT-TCR | Seattle Pacific Industries, Inc | 2.4 TCR |
| NAT-TCR | Central Oil & Supply | 2.4 TCR |
| NAT-SIZE | Cherokee OKC | 30 FTE |
| NAT-SIZE | Utility Transport Services | 30 FTE |
| NAT-SIZE | Specialty Process Labs, LLC | 30 FTE |
| NAT-SIZE | Prairie Hills at Cedar Rapids | 30 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.