Iron work, structural, contractors · Delaware

Atlas Welding & Fabrication, Inc.

New Castle, DE · ~22 workers · 9 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
25.0
Avg TCR
2.8
Industry avg
0
Fatalities

The verdict

Atlas Welding & Fabrication, Inc. runs at 893% of its industry's injury rate - far more dangerous than the typical Iron work, structural, contractors workplace, earning a grade F.

F
Failing Safety Record
25.0
avg TCR · per 100 workers
2.8
industry benchmark (BLS)
48
recordable injuries tracked

Grade compares Atlas Welding & Fabrication, Inc.'s OSHA Total Case Rate of 25.0 to the Iron work, structural, contractors BLS benchmark of 2.8 (893% of benchmark) across 9 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Atlas Welding & Fabrication, Inc.'s yearly Total Case Rate, against the 2.8 industry benchmark.

010203040 201620172018201920202021202220232024 18.22.8 Industry benchmarkAtlas Welding & Fabrication, Inc. TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 238120.

Where Atlas Welding & Fabrication, Inc. falls in its industry

775 Iron work, structural, contrac establishments

Safer than 1% of graded establishments in this industry, whose median TCR is 3.6.

More dangerous than peersSafer than peers

Trend analysis for Atlas Welding & Fabrication, Inc.

Between 2016 and 2024, Atlas Welding & Fabrication, Inc.'s Total Case Rate improved from 21.3 to 18.2 recordable injuries per 100 full-time workers, a 15% decrease across 8 years of OSHA reporting.

The safest year on record was 2024, at a TCR of 18.2, while 2020 saw the highest rate, at 33.2, a spread of 15.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 9 reporting years, Atlas Welding & Fabrication, Inc. recorded 48 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 9-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 48 injuries shown on this page for Atlas Welding & Fabrication, Inc. are sourced from its own 9 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238120 - Iron work, structural, contractors.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

2 DART incidents × 200,000 ÷ 44,032 hours worked = 9.08 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Atlas Welding & Fabrication, Inc. (this establishment) 25.01 OSHA ITA Form 300A, 9-year avg
Structural steel erecting or iron work contractors industry avg 2.80 BLS IIF, NAICS 238120
Delaware state avg (all industries) 4.69 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Atlas Welding & Fabrication, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 18.2 9.1 4 0 0
2023 19.4 4.8 4 0 0
2022 28.0 4.7 6 0 0
2021 19.9 0.0 4 0 0
2020 33.2 0.0 7 0 0
2019 29.5 0.0 6 0 0
2018 27.6 9.2 6 0 0
2017 28.1 9.4 6 0 0
2016 21.3 4.3 5 0 0

What this grade means for you

Use this grade as a relative read on Atlas Welding & Fabrication, Inc.'s reported OSHA injury record versus its Iron work, structural, contractors peers, not a verdict on whether any single site is safe today.

  • At 893% of the Iron work, structural, contractors benchmark, Atlas Welding & Fabrication, Inc. reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Iron work, structural, contractors sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Atlas Welding & Fabrication, Inc.'s safety grade?
Atlas Welding & Fabrication, Inc. has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 25.0 compared to the BLS industry benchmark of 2.8 for Iron work, structural, contractors.
How many injuries has Atlas Welding & Fabrication, Inc. reported?
Atlas Welding & Fabrication, Inc. has reported 48 total injuries and 0 fatalities across 9 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Delaware, and by nearby establishments in New Castle - a different peer set than the category browse links below.

Similar TCR (~25.0)

Similar size (~22 workers)

Nearby in New Castle

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.