Low slope roofing installation · Georgia

Ben Hill Roofing and Siding Co

Douglasville, GA · ~40 workers · 8 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.2
Avg TCR
2.8
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Ben Hill Roofing and Siding Co runs at 113% of its industry's injury rate - about level with the typical Low slope roofing installation workplace, earning a grade C.

Ben Hill Roofing and Siding Co: 3.2 TCR = 113% of Low slope roofing installation BLS 2.8 · 8y Form 300A (see methodology below)

Ben Hill Roofing and Siding Co safety composite

Ben Hill Roofing and Siding Co scores strongest on total case rate (tcr) (safer than 58% of same-industry peers) and weakest on dart rate (safer than 33%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

48/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 3.17 per 100 workers

Safer than 58% of industry peers

DART rate
F 3.33 per 100 workers

Safer than 33% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−1.0

2016→2023

Ben Hill Roofing and Siding Co injury rate improved

Ben Hill Roofing and Siding Co's TCR fell 1.0 from 4.4 in 2016 to 3.3 in 2023. Peak filing year was 2021 at 4.9 TCR. In 2023, DART was 1.05× this establishment's average TCR (severity share of cases).

2016=4.4 · 2017=4.8 · 2018=2.5 · 2019=2.6 · 2020=2.9 · 2021=4.9 · 2022=0.0 · 2023=3.3

OSHA ITA Form 300A scorecard

Establishment book 238160 · Douglasville, GA ABOVE-IND · SMALL

Grade C · TCR 3.2 · 113% of ind

  • DART 3.3 DART
  • RANK #31/41
  • PHOTO Stanley Roofing
  • BOOK 8y book
  • INJ 10 inj
  • SIZE ~40 FTE

Nearest TCR peer: Stanley Roofing (0.0 TCR gap)

Read with this employer → · Industry book → · Georgia employers → · Look up another →

Ben Hill Roofing and Siding Co in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Ben Hill Roofing and Siding Co averages 3.2 TCR (113% of the Low slope roofing installation BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Ben Hill Roofing and Siding Co TCR series: 2016=4.4 · 2017=4.8 · 2018=2.5 · 2019=2.6 · 2020=2.9 · 2021=4.9 · 2022=0 · 2023=3.3 · BLS 2.8

Where Ben Hill Roofing and Siding Co falls in its industry

1,723 Low slope roofing installation establishments

Safer than 58% of graded establishments in this industry, whose median TCR is 3.7.

More dangerous than peersSafer than peers

Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #31 safest of 41 Low slope roofing installation employers in Georgia.

Ben Hill Roofing and Siding Co (40 employees, TCR 3.2) among 29 same-industry peers, split at the industry median of 44 employees and a TCR of 3.7 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150 0102030 Average employees Total Case Rate Ben Hill Roofing and Siding Co
Ben Hill Roofing and Siding Co (40 employees, TCR 3.2) among 29 same-industry peers, split at the industry median of 44 employees and a TCR of 3.7

Ben Hill Roofing and Siding Co has fewer employees than the Low slope roofing installation median and a lower injury rate than the industry's median TCR of 3.7. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 3.3 3.3 1 0 0
2022 0.0 0.0 0 0 0
2021 4.9 4.9 2 0 0
2020 2.9 2.9 1 0 0
2019 2.6 2.6 1 0 0
2018 2.5 2.5 1 0 0
2017 4.8 4.8 2 0 0
2016 4.4 4.4 2 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

238160 · GA · Douglasville

1,723 Low slope roofing installation employers nationwide with a credible TCR · 14,941 rated employers in Georgia with headcount on file · 86 employers in Douglasville, GA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Stanley Roofing 3.2 TCR
NAICS-TCR Newburgh Office 3.2 TCR
NAICS-TCR COMMERCIAL INDUSTRIAL ROOFING, INC-LYNNWOOD 3.2 TCR
NAICS-TCR Rey Crest Roofing and Waterproofing 3.2 TCR
STATE-SIZE Eagle Grove Farms 40 FTE
STATE-SIZE Unlimited Contract Services - Hoboken, GA 40 FTE
STATE-SIZE Southeastern Gin Inc 40 FTE
STATE-SIZE Coffee Co Gin County Inc 40 FTE
CITY-NEAR Six Flags Over Georgia 1,668 FTE
CITY-NEAR WellStar Douglas Hospital 1,069 FTE
CITY-NEAR Douglasville, GA - 04 594 FTE
CITY-NEAR DSS 593 FTE
NAT-TCR Big Lots Store #1954 Warwick, RI 3.2 TCR
NAT-TCR Gold Medal Products 3.2 TCR
NAT-TCR Ludicrous Speed Logistics LLC 3.2 TCR
NAT-TCR 1015-Corasanti 3.2 TCR
NAT-SIZE Brockport 40 FTE
NAT-SIZE A.a. Paint & Custom Finishes, Inc. 40 FTE
NAT-SIZE Southeast Milk, Inc. Okeechobee Trucking 40 FTE
NAT-SIZE Veritiv Operating Company - TN024 40 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.
Data sourced from official public datasets. See our methodology for details.