Roofing contractors · Indiana
B&L Sheet Metal and Roofing A Tecta America Co
Bloomington, IN · ~46 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 10.7
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
B&L Sheet Metal and Roofing A Tecta America Co runs at 383% of its industry's injury rate - far more dangerous than the typical Roofing contractors workplace, earning a grade F.
B&L Sheet Metal and Roofing A Tecta America Co: 10.7 TCR = 383% of Roofing contractors BLS 2.8 · 2y Form 300A (see methodology below)
B&L Sheet Metal and Roofing A Tecta America Co safety composite
B&L Sheet Metal and Roofing A Tecta America Co scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on total case rate (tcr) (safer than 11%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
22/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 10.72 per 100 workers
Safer than 11% of industry peers
- DART rate
- F 7.16 per 100 workers
Safer than 13% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
B&L Sheet Metal and Roofing A Tecta America Co: 9.5 → 11.9 TCR
Peak year 2021 @ 11.9 TCR · DART/TCR 0.67× in 2021
B&L Sheet Metal and Roofing A Tecta America Co's TCR rose 2.4 from 9.5 in 2020 to 11.9 in 2021. In 2021, DART was 0.67× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 238160 · Bloomington, IN ABOVE-IND · SMALL
Grade F · TCR 10.7 · 383% of ind
- DART 7.2 DART
- RANK #38/42
- PHOTO All American Roofing…
- BOOK 2y book
- INJ 7 inj
- SIZE ~46 FTE
Nearest TCR peer: All American Roofing Inc. (0.0 TCR gap)
Read with this employer → · Industry book → · Indiana employers → · Look up another →
B&L Sheet Metal and Roofing A Tecta America Co in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Guarantee Roof
Guarantee Roofing & Sheet Metal of SD, Inc.
10.8 TCR
- Empire Roofing
Empire Roofing and Sheet Metal
10.8 TCR
- This site
B&L Sheet Metal and Roofing A Tecta America Co
10.7 TCR
- All American R
All American Roofing Inc.
10.7 TCR
- d-7 Roofing LL
d-7 Roofing LLC - Colo Spgs
10.7 TCR
What this shows B&L Sheet Metal and Roofing A Tecta America Co averages 10.7 TCR (383% of the Roofing contractors BLS benchmark).
B&L Sheet Metal and Roofing A Tecta America Co TCR series: 2020=9.5 · 2021=11.9 · BLS 2.8
Where B&L Sheet Metal and Roofing A Tecta America Co falls in its industry
1,723 Roofing contractors establishmentsSafer than 11% of graded establishments in this industry, whose median TCR is 3.7.
Narrower to Indiana alone (the establishments it most directly competes with for workers and contracts): ranked #38 safest of 42 Roofing contractors employers in Indiana.
B&L Sheet Metal and Roofing A Tecta America Co has more employees than the Roofing contractors median and a higher injury rate than the industry's median TCR of 3.7. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 11.9 | 7.2 | 5 | 0 | 0 |
| 2020 | 9.5 | 0.0 | 2 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
238160 · IN · Bloomington
1,723 Roofing contractors employers nationwide with a credible TCR · 12,750 rated employers in Indiana with headcount on file · 204 employers in Bloomington, IN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | All American Roofing Inc. | 10.7 TCR |
| NAICS-TCR | d-7 Roofing LLC - Colo Spgs | 10.7 TCR |
| NAICS-TCR | Guarantee Roofing & Sheet Metal of SD, Inc. | 10.8 TCR |
| NAICS-TCR | Empire Roofing and Sheet Metal | 10.8 TCR |
| STATE-SIZE | Legacy Parlor | 46 FTE |
| STATE-SIZE | 161-NiSource-Hammond IN-Gas Opns Center | 46 FTE |
| STATE-SIZE | Milhaus Construction LLC | 46 FTE |
| STATE-SIZE | Moore Restoration Inc | 46 FTE |
| CITY-NEAR | Cook Incorporated Park 48 | 3,062 FTE |
| CITY-NEAR | Cook Inc | 2,976 FTE |
| CITY-NEAR | CI-P48 | 2,567 FTE |
| CITY-NEAR | Bloomington | 2,251 FTE |
| NAT-TCR | Du Quoin IIP | 10.7 TCR |
| NAT-TCR | Drury Inn & Suites - Nashville Airport | 10.7 TCR |
| NAT-TCR | Lakeland Community Hospital Watervliet | 10.7 TCR |
| NAT-TCR | Elderwood of Scallop Shell at Wakefield | 10.7 TCR |
| NAT-SIZE | Campbell Manufacturing LLC | 46 FTE |
| NAT-SIZE | VPI Phoenix | 46 FTE |
| NAT-SIZE | Linder Equipment Company | 46 FTE |
| NAT-SIZE | New Hudson Facades - MN | 46 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.