Extruded, molded or lathe-cut rubber goods manufacturing · Kansas

CAMSO Manufacturing

Junction City, KS · ~178 workers · 4 years of OSHA Injury Tracking Application data.

C
Average Safety Record
2.7
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

CAMSO Manufacturing runs at 83% of its industry's injury rate - about level with the typical Extruded, molded or lathe-cut rubber goods manufacturing workplace, earning a grade C.

CAMSO Manufacturing: 2.7 TCR = 83% of Extruded, molded or lathe-cut rubber goods manufacturing BLS 3.3 · 4y Form 300A (see methodology below)

CAMSO Manufacturing safety composite

CAMSO Manufacturing scores strongest on dart rate (safer than 85% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

68/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 2.73 per 100 workers

Safer than 64% of industry peers

DART rate
B 0 per 100 workers

Safer than 85% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−6.3

2020→2024

CAMSO Manufacturing injury rate improved

CAMSO Manufacturing's TCR fell 6.3 from 6.5 in 2020 to 0.3 in 2024. Peak filing year was 2020 at 6.5 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

2020=6.5 · 2022=2.7 · 2023=1.3 · 2024=0.3

OSHA ITA Form 300A scorecard

Establishment book 326291 · Junction City, KS AT/BELOW-IND · MID

Grade C · TCR 2.7 · 83% of ind

  • DART 0.0 DART
  • RANK #1/5
  • PHOTO FlexMag - Norfolk
  • BOOK 4y book
  • INJ 11 inj
  • SIZE ~178 FTE

Nearest TCR peer: FlexMag - Norfolk (0.0 TCR gap)

Read with this employer → · Industry book → · Kansas employers → · Look up another →

CAMSO Manufacturing in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows CAMSO Manufacturing averages 2.7 TCR (83% of the Extruded, molded or lathe-cut rubber goods manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

CAMSO Manufacturing TCR series: 2020=6.5 · 2022=2.7 · 2023=1.3 · 2024=0.3 · BLS 3.3

Where CAMSO Manufacturing falls in its industry

266 Extruded, molded or lathe-cut establishments

Safer than 64% of graded establishments in this industry, whose median TCR is 3.6.

More dangerous than peersSafer than peers

Narrower to Kansas alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 5 Extruded, molded or lathe-cut employers in Kansas.

CAMSO Manufacturing (178 employees, TCR 2.7) among 29 same-industry peers, split at the industry median of 81 employees and a TCR of 3.6 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600 0510152025 Average employees Total Case Rate CAMSO Manufacturing
CAMSO Manufacturing (178 employees, TCR 2.7) among 29 same-industry peers, split at the industry median of 81 employees and a TCR of 3.6

CAMSO Manufacturing has more employees than the Extruded, molded or lathe-cut rubber goo median and a lower injury rate than the industry's median TCR of 3.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.3 0.0 1 0 0
2023 1.3 0.9 3 0 0
2022 2.7 1.4 4 0 0
2020 6.5 4.4 3 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

326291 · KS · Junction City

266 Extruded, molded or lathe-cut rubber goods manufacturing employers nationwide with a credible TCR · 5,228 rated employers in Kansas with headcount on file · 29 employers in Junction City, KS · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR FlexMag - Norfolk 2.7 TCR
NAICS-TCR 3031 - 02-HUMBLE INDUSTRIES INC 2.7 TCR
NAICS-TCR HQ Facility 2.7 TCR
NAICS-TCR Butler, WI 2.8 TCR
STATE-SIZE Teague Electric 178 FTE
STATE-SIZE Allegion Olathe 178 FTE
STATE-SIZE Horizon Global Edgerton 178 FTE
STATE-SIZE QSI - Cargill Dodge City 178 FTE
CITY-NEAR Foot Locker JCSC 766 FTE
CITY-NEAR Foot Locker Corporate Services Inc. 746 FTE
CITY-NEAR Junction City Packaging 475 FTE
CITY-NEAR Smithfield Packaged Meats Corp. 437 FTE
NAT-TCR 2396 - Red Mill 2.7 TCR
NAT-TCR Duro Electric 2.7 TCR
NAT-TCR Vari-Wall Tube Specialists, Inc. 2.7 TCR
NAT-TCR MPP - Rockwood 2.7 TCR
NAT-SIZE 0680 - Henderson Stephanie Street 178 FTE
NAT-SIZE 2478 - Midlothian Perimeter Dr 178 FTE
NAT-SIZE Pratt paper NY, LLC 178 FTE
NAT-SIZE 3861 - Dallas Sortation Center 178 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2020. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.