Ornamental metalwork manufacturing · California
Capitol Steel Products
Sacramento, CA · ~39 workers · 7 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 10.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Capitol Steel Products runs at 302% of its industry's injury rate - far more dangerous than the typical Ornamental metalwork manufacturing workplace, earning a grade F.
- F
- Failing Safety Record
- 10.0
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 23
- recordable injuries tracked
Grade compares Capitol Steel Products's OSHA Total Case Rate to the BLS industry benchmark across 7 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Capitol Steel Products's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Capitol Steel Products falls in its industry
335 Ornamental metalwork manufactu establishmentsSafer than 11% of graded establishments in this industry, whose median TCR is 3.9.
Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #21 safest of 22 Ornamental metalwork manufactu employers in California.
Capitol Steel Products has an average TCR of 10.0, which is 302% of the industry average (3.3) for Ornamental metalwork manufacturing. This is significantly worse than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for Capitol Steel Products
Between 2017 and 2024, Capitol Steel Products's Total Case Rate worsened from 6.2 to 10.5 recordable injuries per 100 full-time workers, a 69% increase across 7 years of OSHA reporting.
The safest year on record was 2017, at a TCR of 6.2, while 2023 saw the highest rate, at 14.6, a spread of 8.4 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 7 reporting years, Capitol Steel Products recorded 23 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Capitol Steel Products's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332323 - Ornamental metalwork manufacturing.
DART Rate, Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 76,042 hours worked = 5.26 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Capitol Steel Products (this establishment) | 9.96 | OSHA ITA Form 300A, 7-year avg |
| Pipe railings, metal, manufacturing industry avg | 3.30 | BLS IIF, NAICS 332323 |
| California state avg (all industries) | 5.64 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Capitol Steel Products to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 4 reportable incidents · 3 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 6 reportable incidents · 4 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 5 reportable incidents · 4 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 5 reportable incidents · 4 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 10.5 | 5.3 | 3 | 1 | 0 |
| 2023 | 14.6 | 7.3 | 4 | 2 | 0 |
| 2022 | 7.1 | 7.1 | 3 | 0 | 0 |
| 2021 | 12.2 | 4.9 | 4 | 1 | 0 |
| 2020 | 7.4 | 2.5 | 3 | 0 | 0 |
| 2019 | 11.8 | 4.7 | 4 | 1 | 0 |
| 2017 | 6.2 | 3.1 | 2 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Capitol Steel Products's reported OSHA injury record versus its Ornamental metalwork manufacturing peers, not a verdict on whether any single site is safe today.
- At 302% of the Ornamental metalwork manufacturing benchmark, Capitol Steel Products reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Ornamental metalwork manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Capitol Steel Products's safety grade?
How many injuries has Capitol Steel Products reported?
Similar Employers
Matched by safety record across the industry and by workforce size within California - a different peer set than the category browse links below.
Similar TCR (~10.0)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.