Roofing (i.e., single ply rubber membrane) manufacturing · Illinois

Carlisle Syntec - Greenville, IL

Greenville, IL · ~357 workers · 4 years of OSHA Injury Tracking Application data.

Compiled by PlainSafetyScore Editorial, Employer Workplace Safety Editorial Team · May 15, 2026

B
Good Safety Record: 2.3
Avg TCR: 3.3
Industry avg: 0
Fatalities

The verdict

Carlisle Syntec - Greenville, IL runs at 69% of its industry's injury rate - safer than the typical Roofing (i.e., single ply rubber membrane) manufacturing workplace, earning a grade B.

B
Good Safety Record: 2.3
avg TCR · per 100 workers: 3.3
industry benchmark (BLS): 33
recordable injuries tracked

Grade compares Carlisle Syntec - Greenville, IL's OSHA Total Case Rate of 2.3 to the Roofing (i.e., single ply rubber membrane) manufacturing BLS benchmark of 3.3 (69% of benchmark) across 4 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Carlisle Syntec - Greenville, IL's yearly Total Case Rate, against the 3.3 industry benchmark.

Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 326299.

Where Carlisle Syntec - Greenville, IL falls in its industry

277 Roofing (i.e., single ply rubb establishments

Safer than 67% of graded establishments in this industry, whose median TCR is 3.4.

Grade B

More dangerous than peersSafer than peers

Narrower to Illinois alone (the establishments it most directly competes with for workers and contracts): ranked #5 safest of 16 Roofing (i.e., single ply rubb employers in Illinois.

Trend analysis for Carlisle Syntec - Greenville, IL

Between 2016 and 2020, Carlisle Syntec - Greenville, IL's Total Case Rate improved from 3.2 to 1.6 recordable injuries per 100 full-time workers, a 48% decrease across 4 years of OSHA reporting.

The safest year on record was 2020, at a TCR of 1.6, while 2016 saw the highest rate, at 3.2, a spread of 1.5 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 4 years with a usable rate on file, rather than one outlier year skewing the multi-year average.

Summed across those 4 reporting years, Carlisle Syntec - Greenville, IL recorded 33 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 4-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 33 injuries shown on this page for Carlisle Syntec - Greenville, IL are sourced from its own 4 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 326299 - Roofing (i.e., single ply rubber membrane) manufacturing.

DART Rate, Transparent Calculation (2020)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

5 DART incidents × 200,000 ÷ 725,800 hours worked = 1.38 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark	TCR	Source
Carlisle Syntec - Greenville, IL (this establishment)	2.29	OSHA ITA Form 300A, 4-year avg
Rods, hard rubber, manufacturing industry avg	3.30	BLS IIF, NAICS 326299
Illinois state avg (all industries)	4.73	OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Carlisle Syntec - Greenville, IL to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

2020: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2019: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2018: 10 reportable incidents · 10 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2016: 10 reportable incidents · 10 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year	TCR	DART	Injuries
2020	1.6	1.4	6
2019	1.8	1.5	7
2018	2.6	1.8	10
2016	3.2	2.9	10

What this grade means for you

Use this grade as a relative read on Carlisle Syntec - Greenville, IL's reported OSHA injury record, strong versus its Roofing (i.e., single ply rubber membrane) manufacturing peers, but not a guarantee about any single site today.

At 69% of the Roofing (i.e., single ply rubber membrane) manufacturing benchmark, Carlisle Syntec - Greenville, IL reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
Judge this record against the wider Roofing (i.e., single ply rubber membrane) manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Carlisle Syntec - Greenville, IL's safety grade?

Carlisle Syntec - Greenville, IL has a safety grade of B (Good Safety Record). This grade is based on their average Total Case Rate (TCR) of 2.3 compared to the BLS industry benchmark of 3.3 for Roofing (i.e., single ply rubber membrane) manufacturing.

How many injuries has Carlisle Syntec - Greenville, IL reported?

Carlisle Syntec - Greenville, IL has reported 33 total injuries and 0 fatalities across 4 years of OSHA data (2020, 2019, 2018, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Illinois, and by nearby establishments in Greenville - a different peer set than the category browse links below.

Similar TCR (~2.3)

Similar size (~357 workers)

Nearby in Greenville

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2020, 2019, 2018, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.