MILLWORK · Pennsylvania
Carter Door & Millwork Hub 389
Hanover, PA · ~4,102 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Carter Door & Millwork Hub 389 runs at 117% of its industry's injury rate - about level with the typical MILLWORK workplace, earning a grade C.
- C
- Average Safety Record
- 3.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 471
- recordable injuries tracked
Grade compares Carter Door & Millwork Hub 389's OSHA Total Case Rate to the BLS industry benchmark across 3 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Carter Door & Millwork Hub 389's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Carter Door & Millwork Hub 389 falls in its industry
473 MILLWORK establishmentsSafer than 61% of graded establishments in this industry, whose median TCR is 4.8.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #8 safest of 21 MILLWORK employers in Pennsylvania.
Carter Door & Millwork Hub 389 has an average TCR of 3.9, which is 117% of the industry average (3.3) for MILLWORK. This is worse than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for Carter Door & Millwork Hub 389
Between 2019 and 2021, Carter Door & Millwork Hub 389's Total Case Rate worsened from 3.9 to 4.5 recordable injuries per 100 full-time workers, a 16% increase across 2 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 3.2, while 2021 saw the highest rate, at 4.5, a spread of 1.3 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 3 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 3 reporting years, Carter Door & Millwork Hub 389 recorded 471 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Carter Door & Millwork Hub 389's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 321911 - MILLWORK.
DART Rate, Transparent Calculation (2021)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
44 DART incidents × 200,000 ÷ 8,273,135 hours worked = 1.06 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Carter Door & Millwork Hub 389 (this establishment) | 3.85 | OSHA ITA Form 300A, 3-year avg |
| Door frames and sash, wood and covered wood, manufacturing industry avg | 3.30 | BLS IIF, NAICS 321911 |
| Pennsylvania state avg (all industries) | 5.06 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Carter Door & Millwork Hub 389 to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 186 reportable incidents · 183 injuries, 3 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 121 reportable incidents · 121 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 167 reportable incidents · 167 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 4.5 | 1.1 | 183 | 3 | 0 |
| 2020 | 3.2 | 0.2 | 121 | 0 | 0 |
| 2019 | 3.9 | 1.7 | 167 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Carter Door & Millwork Hub 389's reported OSHA injury record versus its MILLWORK peers, not a verdict on whether any single site is safe today.
- At 117% of the MILLWORK benchmark, Carter Door & Millwork Hub 389 reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider MILLWORK sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Carter Door & Millwork Hub 389's safety grade?
How many injuries has Carter Door & Millwork Hub 389 reported?
Similar Employers
Matched by safety record across the industry and by workforce size within Pennsylvania - a different peer set than the category browse links below.
Similar TCR (~3.9)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.