Airlocks, fabricated metal plate work, manufacturing · Iowa

CB&I Clive

Clive, IA · ~76 workers · 5 years of OSHA Injury Tracking Application data.

A
Excellent Safety Record
0.5
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

CB&I Clive runs at 15% of its industry's injury rate - far safer than the typical Airlocks, fabricated metal plate work, manufacturing workplace, earning a grade A.

A
Excellent Safety Record
0.5
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
2
recordable injuries tracked

Grade compares CB&I Clive's OSHA Total Case Rate to the BLS industry benchmark across 5 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

CB&I Clive's yearly Total Case Rate, against the 3.3 industry benchmark.

-101234 20162017201820192020 03.3 Industry benchmarkCB&I Clive TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332313.

Where CB&I Clive falls in its industry

470 Airlocks, fabricated metal pla establishments

Safer than 93% of graded establishments in this industry, whose median TCR is 4.2.

More dangerous than peersSafer than peers

Narrower to Iowa alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 9 Airlocks, fabricated metal pla employers in Iowa.

CB&I Clive has an average TCR of 0.5, which is 15% of the industry average (3.3) for Airlocks, fabricated metal plate work, manufacturing. This is significantly better than average.

The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.

Trend analysis for CB&I Clive

Between 2016 and 2020, CB&I Clive's Total Case Rate improved from 1.1 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 4 years of OSHA reporting.

The safest year on record was 2018, at a TCR of 0.0, while 2017 saw the highest rate, at 1.4, a spread of 1.4 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 5 reporting years, CB&I Clive recorded 2 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from CB&I Clive's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332313 - Airlocks, fabricated metal plate work, manufacturing.

DART Rate, Transparent Calculation (2020)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 101,410 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
CB&I Clive (this establishment) 0.50 OSHA ITA Form 300A, 5-year avg
Fabricated plate work manufacturing industry avg 3.30 BLS IIF, NAICS 332313
Iowa state avg (all industries) 5.33 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by CB&I Clive to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2020 0.0 0.0 0 0 0
2019 0.0 0.0 0 0 0
2018 0.0 0.0 0 0 0
2017 1.4 0.0 1 0 0
2016 1.1 0.0 1 0 0

What this grade means for you

Use this grade as a relative read on CB&I Clive's reported OSHA injury record, strong versus its Airlocks, fabricated metal plate work, manufacturing peers, but not a guarantee about any single site today.

  • At 15% of the Airlocks, fabricated metal plate work, manufacturing benchmark, CB&I Clive reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Airlocks, fabricated metal plate work, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is CB&I Clive's safety grade?
CB&I Clive has a safety grade of A (Excellent Safety Record). This grade is based on their average Total Case Rate (TCR) of 0.5 compared to the BLS industry benchmark of 3.3 for Airlocks, fabricated metal plate work, manufacturing.
How many injuries has CB&I Clive reported?
CB&I Clive has reported 2 total injuries and 0 fatalities across 5 years of OSHA data (2020, 2019, 2018, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry and by workforce size within Iowa - a different peer set than the category browse links below.

Similar TCR (~0.5)

Similar size (~76 workers)

Explore More Safety Data

→ More employers in Iowa → Industry: Airlocks, fabricated metal plate work, manufacturing → Safety grades explained → How to check employer safety → Understanding OSHA rates
Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Related

All employers → | Rankings →
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.