Awnings, rigid plastics or fiberglass, manufacturing · Colorado

C.F. Maier Composites, Inc.

Lamar, CO · ~49 workers · 4 years of OSHA Injury Tracking Application data.

C
Average Safety Record
4.0
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

C.F. Maier Composites, Inc. runs at 120% of its industry's injury rate - about level with the typical Awnings, rigid plastics or fiberglass, manufacturing workplace, earning a grade C.

C.F. Maier Composites, Inc.: 4.0 TCR = 120% of Awnings, rigid plastics or fiberglass, manufacturing BLS 3.3 · 4y Form 300A (see methodology below)

C.F. Maier Composites, Inc. safety composite

C.F. Maier Composites, Inc. scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 35%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

42/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
D 3.95 per 100 workers

Safer than 43% of industry peers

DART rate
D 2.78 per 100 workers

Safer than 35% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

C.F. Maier Composites, Inc.: 0.0 → 2.8 TCR

Peak year 2022 @ 13.0 TCR · DART/TCR 0.7× in 2024

C.F. Maier Composites, Inc.'s TCR rose 2.8 from 0.0 in 2020 to 2.8 in 2024. Peak filing year was 2022 at 13.0 TCR. In 2024, DART was 0.7× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 326199 · Lamar, CO ABOVE-IND · SMALL

Grade C · TCR 4.0 · 120% of ind

  • DART 2.8 DART
  • RANK #21/32
  • PHOTO Kraft North Assembly…
  • BOOK 4y book
  • INJ 12 inj
  • SIZE ~49 FTE

Nearest TCR peer: Kraft North Assembly & Distribution (0.0 TCR gap)

Read with this employer → · Industry book → · Colorado employers → · Look up another →

C.F. Maier Composites, Inc. in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows C.F. Maier Composites, Inc. averages 4.0 TCR (120% of the Awnings, rigid plastics or fiberglass, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

C.F. Maier Composites, Inc. TCR series: 2020=0 · 2022=13 · 2023=0 · 2024=2.8 · BLS 3.3

Where C.F. Maier Composites, Inc. falls in its industry

2,838 Awnings, rigid plastics or fib establishments

Safer than 43% of graded establishments in this industry, whose median TCR is 3.5.

More dangerous than peersSafer than peers

Narrower to Colorado alone (the establishments it most directly competes with for workers and contracts): ranked #21 safest of 32 Awnings, rigid plastics or fib employers in Colorado.

C.F. Maier Composites, Inc. (49 employees, TCR 4.0) among 29 same-industry peers, split at the industry median of 101 employees and a TCR of 3.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400 05101520 Average employees Total Case Rate C.F. Maier Composites, Inc.
C.F. Maier Composites, Inc. (49 employees, TCR 4.0) among 29 same-industry peers, split at the industry median of 101 employees and a TCR of 3.5

C.F. Maier Composites, Inc. has fewer employees than the Awnings, rigid plastics or fiberglass, m median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 2.8 2.8 4 0 0
2023 0.0 0.0 0 0 0
2022 13.0 13.0 8 0 0
2020 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

326199 · CO · Lamar

2,838 Awnings, rigid plastics or fiberglass, manufacturing employers nationwide with a credible TCR · 9,007 rated employers in Colorado with headcount on file · 15 employers in Lamar, CO · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Kraft North Assembly & Distribution 4.0 TCR
NAICS-TCR Enduraplas - Converse 4.0 TCR
NAICS-TCR Nolato Contour 4.0 TCR
NAICS-TCR Precision Fluorocarbon Inc 4.0 TCR
STATE-SIZE Konisto Companies, LLC. 49 FTE
STATE-SIZE Summit County Ops Center-650 49 FTE
STATE-SIZE Tralon Homes, LLC 49 FTE
STATE-SIZE KW Woodworks Inc. dba KW Construction & Restoration 49 FTE
CITY-NEAR Prowers Medical Center 204 FTE
CITY-NEAR WM 2672 192 FTE
CITY-NEAR 2672 183 FTE
CITY-NEAR Dragon Products Lamar 70 FTE
NAT-TCR Panko Electrical & Maint., Inc 4.0 TCR
NAT-TCR NFI Interactive Logistics LLC-7800 PENN DRIVE 4.0 TCR
NAT-TCR Buhl 4.0 TCR
NAT-TCR RCI Power & Lighting Inc 4.0 TCR
NAT-SIZE LT Foods Americas, Inc. 49 FTE
NAT-SIZE Earle M Jorgensen Co 49 FTE
NAT-SIZE Magnolia Creek 49 FTE
NAT-SIZE Adaptive Micro Systems, LLC 49 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2020. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.