Skids and pallets, wood or wood and metal combination, manufacturing · Georgia
CHEP Atlanta Service Center (UT7X)
Atlanta, GA · ~113 workers · 8 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 6.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
CHEP Atlanta Service Center (UT7X) runs at 181% of its industry's injury rate - more dangerous than the typical Skids and pallets, wood or wood and metal combination, manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 6.0
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 55
- recordable injuries tracked
Grade compares CHEP Atlanta Service Center (UT7X)'s OSHA Total Case Rate of 6.0 to the Skids and pallets, wood or wood and metal combination, manufacturing BLS benchmark of 3.3 (181% of benchmark) across 8 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
CHEP Atlanta Service Center (UT7X)'s yearly Total Case Rate, against the 3.3 industry benchmark.
Where CHEP Atlanta Service Center (UT7X) falls in its industry
1,011 Skids and pallets, wood or woo establishmentsSafer than 50% of graded establishments in this industry, whose median TCR is 6.0.
Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #27 safest of 50 Skids and pallets, wood or woo employers in Georgia.
Trend analysis for CHEP Atlanta Service Center (UT7X)
Between 2017 and 2024, CHEP Atlanta Service Center (UT7X)'s Total Case Rate worsened from 3.0 to 3.3 recordable injuries per 100 full-time workers, a 10% increase across 7 years of OSHA reporting.
The safest year on record was 2017, at a TCR of 3.0, while 2022 saw the highest rate, at 10.4, a spread of 7.4 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 8 reporting years, CHEP Atlanta Service Center (UT7X) recorded 55 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 8-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 55 injuries shown on this page for CHEP Atlanta Service Center (UT7X) are sourced from its own 8 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 321920 - Skids and pallets, wood or wood and metal combination, manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 60,659 hours worked = 3.30 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| CHEP Atlanta Service Center (UT7X) (this establishment) | 5.98 | OSHA ITA Form 300A, 8-year avg |
| Skids and pallets, wood or wood and metal combination, manufacturing industry avg | 3.30 | BLS IIF, NAICS 321920 |
| Georgia state avg (all industries) | 4.11 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by CHEP Atlanta Service Center (UT7X) to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 13 reportable incidents · 13 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 13 reportable incidents · 13 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 9 reportable incidents · 9 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 8 reportable incidents · 8 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.3 | 3.3 | 1 | 0 | 0 |
| 2023 | 10.4 | 1.6 | 13 | 0 | 0 |
| 2022 | 10.4 | 3.2 | 13 | 0 | 0 |
| 2021 | 4.5 | 4.5 | 5 | 0 | 0 |
| 2020 | 6.9 | 3.8 | 9 | 0 | 0 |
| 2019 | 3.1 | 1.6 | 4 | 0 | 0 |
| 2018 | 6.3 | 3.1 | 8 | 0 | 0 |
| 2017 | 3.0 | 3.0 | 2 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on CHEP Atlanta Service Center (UT7X)'s reported OSHA injury record versus its Skids and pallets, wood or wood and metal combination, manufacturing peers, not a verdict on whether any single site is safe today.
- At 181% of the Skids and pallets, wood or wood and metal combination, manufacturing benchmark, CHEP Atlanta Service Center (UT7X) reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Skids and pallets, wood or wood and metal combination, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is CHEP Atlanta Service Center (UT7X)'s safety grade?
How many injuries has CHEP Atlanta Service Center (UT7X) reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Georgia, and by nearby establishments in Atlanta - a different peer set than the category browse links below.
Similar TCR (~6.0)
Similar size (~113 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.