Sheet metal work (except stampings) manufacturing · New York

Clark Specialty Co., Inc.

Bath, NY · ~25 workers · 3 years of OSHA Injury Tracking Application data.

A
Excellent Safety Record
1.3
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Clark Specialty Co., Inc. runs at 40% of its industry's injury rate - far safer than the typical Sheet metal work (except stampings) manufacturing workplace, earning a grade A.

Clark Specialty Co., Inc.: 1.3 TCR = 40% of Sheet metal work (except stampings) manufacturing BLS 3.3 · 3y Form 300A (see methodology below)

Clark Specialty Co., Inc. safety composite

Clark Specialty Co., Inc. scores strongest on total case rate (tcr) (safer than 92% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

B

79/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
A 1.32 per 100 workers

Safer than 92% of industry peers

DART rate
B 0 per 100 workers

Safer than 83% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Clark Specialty Co., Inc. held a steady TCR band

Clark Specialty Co., Inc.'s TCR held near 0.0 from 0.0 in 2022 to 0.0 in 2024. Peak filing year was 2023 at 4.0 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

2022=0.0 · 2023=4.0 · 2024=0.0

OSHA ITA Form 300A scorecard

Establishment book 332322 · Bath, NY AT/BELOW-IND · SMALL

Grade A · TCR 1.3 · 40% of ind

  • DART 0.0 DART
  • RANK #7/58
  • PHOTO JNL STEEL COMPONENTS…
  • BOOK 3y book
  • INJ 1 inj
  • SIZE ~25 FTE

Nearest TCR peer: JNL STEEL COMPONENTS, INC. (0.0 TCR gap)

Read with this employer → · Industry book → · New York employers → · Look up another →

Clark Specialty Co., Inc. in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Clark Specialty Co., Inc. averages 1.3 TCR (40% of the Sheet metal work (except stampings) manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Clark Specialty Co., Inc. TCR series: 2022=0 · 2023=4 · 2024=0 · BLS 3.3

Where Clark Specialty Co., Inc. falls in its industry

1,158 Sheet metal work (except stamp establishments

Safer than 92% of graded establishments in this industry, whose median TCR is 4.5.

More dangerous than peersSafer than peers

Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 58 Sheet metal work (except stamp employers in New York.

Clark Specialty Co., Inc. (25 employees, TCR 1.3) among 29 same-industry peers, split at the industry median of 58 employees and a TCR of 4.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150200 05101520 Average employees Total Case Rate Clark Specialty Co., Inc.
Clark Specialty Co., Inc. (25 employees, TCR 1.3) among 29 same-industry peers, split at the industry median of 58 employees and a TCR of 4.5

Clark Specialty Co., Inc. has fewer employees than the Sheet metal work (except stampings) manu median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.0 0.0 0 0 0
2023 4.0 4.0 1 0 0
2022 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332322 · NY · Bath

1,158 Sheet metal work (except stampings) manufacturing employers nationwide with a credible TCR · 21,008 rated employers in New York with headcount on file · 22 employers in Bath, NY · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR JNL STEEL COMPONENTS, INC. 1.3 TCR
NAICS-TCR KEMCO Industries, LLC 1.3 TCR
NAICS-TCR CUTTING EDGE LASER MACHINING, INC. 1.3 TCR
NAICS-TCR Complete Curb Products 1.3 TCR
STATE-SIZE Atlantic Nurseries, Inc. 25 FTE
STATE-SIZE 242 Madava New York 25 FTE
STATE-SIZE Greenwood dairy Farm LLC 25 FTE
STATE-SIZE Scipio Springs Dairy 25 FTE
CITY-NEAR Industrial Park - Actual 249 FTE
CITY-NEAR IRA Davenport Memorial Hospital 226 FTE
CITY-NEAR Tops 539 133 FTE
CITY-NEAR Tops #539 116 FTE
NAT-TCR Curated Events Charleston 1.3 TCR
NAT-TCR Aulick Truck & Trailer Inc 1.3 TCR
NAT-TCR MRC- Mirador 1.3 TCR
NAT-TCR Price 1.3 TCR
NAT-SIZE 5324-Timberline Disposal 25 FTE
NAT-SIZE Kyocera SLD Laser Inc. 25 FTE
NAT-SIZE Ultimate Internet Access, Inc. 25 FTE
NAT-SIZE L!VE Technologies 3DX 25 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.