Habilitation job counseling and training, vocational · New Mexico
Clearance Corner
Albuquerque, NM · ~28 workers · 3 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 15.2
- Avg TCR
- 3.8
- Industry avg
- 0
- Fatalities
The verdict
Clearance Corner runs at 401% of its industry's injury rate - far more dangerous than the typical Habilitation job counseling and training, vocational workplace, earning a grade F.
- F
- Failing Safety Record
- 15.2
- avg TCR · per 100 workers
- 3.8
- industry benchmark (BLS)
- 11
- recordable injuries tracked
Grade compares Clearance Corner's OSHA Total Case Rate of 15.2 to the Habilitation job counseling and training, vocational BLS benchmark of 3.8 (401% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Clearance Corner's yearly Total Case Rate, against the 3.8 industry benchmark.
Where Clearance Corner falls in its industry
1,720 Habilitation job counseling an establishmentsSafer than 5% of graded establishments in this industry, whose median TCR is 3.7.
Narrower to New Mexico alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 7 Habilitation job counseling an employers in New Mexico.
Trend analysis for Clearance Corner
Between 2016 and 2018, Clearance Corner's Total Case Rate held roughly steady from 14.9 to 15.4 recordable injuries per 100 full-time workers, a 3% increase across 2 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 14.9, while 2018 saw the highest rate, at 15.4, a spread of 0.5 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 3 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 3 reporting years, Clearance Corner recorded 11 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 11 injuries, 1 illnesses shown on this page for Clearance Corner are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 624310 - Habilitation job counseling and training, vocational.
DART Rate, Transparent Calculation (2018)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
3 DART incidents × 200,000 ÷ 38,842 hours worked = 15.45 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Clearance Corner (this establishment) | 15.23 | OSHA ITA Form 300A, 3-year avg |
| Workshops for persons with disabilities industry avg | 3.80 | BLS IIF, NAICS 624310 |
| New Mexico state avg (all industries) | 5.12 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Clearance Corner to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2018: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 5 reportable incidents · 4 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2018 | 15.4 | 15.4 | 3 | 0 | 0 |
| 2017 | 15.3 | 11.5 | 4 | 0 | 0 |
| 2016 | 14.9 | 6.0 | 4 | 1 | 0 |
What this grade means for you
Use this grade as a relative read on Clearance Corner's reported OSHA injury record versus its Habilitation job counseling and training, vocational peers, not a verdict on whether any single site is safe today.
- At 401% of the Habilitation job counseling and training, vocational benchmark, Clearance Corner reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Habilitation job counseling and training, vocational sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Clearance Corner's safety grade?
How many injuries has Clearance Corner reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New Mexico, and by nearby establishments in Albuquerque - a different peer set than the category browse links below.
Similar TCR (~15.2)
Similar size (~28 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.