Sheet metal forming machines manufacturing · Florida

Control Micro Systems

Name: Control Micro Systems Workplace Safety Data
Creator: PlainSafetyScore
License: https://creativecommons.org/publicdomain/zero/1.0/

Winter Park, FL · ~51 workers · 6 years of OSHA Injury Tracking Application data.

Compiled by PlainSafetyScore · August 25, 2026

A
Excellent Safety Record: 0.3
Avg TCR: 3.3
Industry avg: 0
Fatalities

Subscribe to safety-record updates (RSS)

The verdict

Control Micro Systems runs at 8% of its industry's injury rate - far safer than the typical Sheet metal forming machines manufacturing workplace, earning a grade A.

Control Micro Systems: 0.3 TCR = 8% of Sheet metal forming machines manufacturing BLS 3.3 · 6y Form 300A (see methodology below)

Control Micro Systems safety composite

Control Micro Systems scores strongest on total case rate (tcr) (safer than 99% of same-industry peers) and weakest on dart rate (safer than 35%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

64/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR): A 0.28 per 100 workers

Safer than 99% of industry peers
DART rate: D 1.66 per 100 workers

Safer than 35% of industry peers
Fatalities: D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Control Micro Systems: 0.0 → 1.7 TCR

Peak year 2022 @ 1.7 TCR · DART/TCR 5.93× in 2022

Control Micro Systems's TCR rose 1.7 from 0.0 in 2017 to 1.7 in 2022. In 2022, DART was 5.93× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 333517 · Winter Park, FL AT/BELOW-IND · SMALL

Grade A · TCR 0.3 · 8% of ind

DART 1.7 DART
RANK #1/7
PHOTO Decatur Diamond, LLC
BOOK 6y book
INJ 1 inj
SIZE ~51 FTE

Nearest TCR peer: Decatur Diamond, LLC (0.0 TCR gap)

Read with this employer → · Industry book → · Florida employers → · Look up another →

BRUSH RESEARCH

0.4
Corporate : BE

0.4
This site

0.3
Decatur Diamon

0.2
Sandvik Fair L

0.2

What this shows Control Micro Systems averages 0.3 TCR (8% of the Sheet metal forming machines manufacturing BLS benchmark).

Control Micro Systems TCR series: 2017=0 · 2018=0 · 2019=0 · 2020=0 · 2021=0 · 2022=1.7 · BLS 3.3

Where Control Micro Systems falls in its industry

391 Sheet metal forming machines m establishments

Safer than 99% of graded establishments in this industry, whose median TCR is 3.4.

Grade A

More dangerous than peersSafer than peers

Narrower to Florida alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 7 Sheet metal forming machines m employers in Florida.

Control Micro Systems (51 employees, TCR 0.3) among 29 same-industry peers, split at the industry median of 55 employees and a TCR of 3.4

Control Micro Systems has fewer employees than the Sheet metal forming machines manufacturi median and a lower injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year	TCR	DART	Injuries
2022	1.7	1.7	1
2021	0.0	0.0	0
2020	0.0	0.0	0
2019	0.0	0.0	0
2018	0.0	0.0	0
2017	0.0	0.0	0

OSHA ITA peer cross-reference

Establishment peer ledger

333517 · FL · Winter Park

391 Sheet metal forming machines manufacturing employers nationwide with a credible TCR · 26,569 rated employers in Florida with headcount on file · 116 employers in Winter Park, FL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel	Establishment	Place	Metric
NAICS-TCR	Decatur Diamond, LLC	DECATUR, IN	0.2 TCR
NAICS-TCR	Sandvik Fair Lawn	FAIR LAWN, NJ	0.2 TCR
NAICS-TCR	BRUSH RESEARCH MANAFACTURING	LOS ANGELES, CA	0.4 TCR
NAICS-TCR	Corporate : BEDFORD PARK 6000	BEDFORD PARK, IL	0.4 TCR
STATE-SIZE	CGC Agri-Management Inc.	ZOLFO SRPINGS	51 FTE
STATE-SIZE	Phillip Rucks Citrus Nursery, Inc.	FROSTPROOF	51 FTE
STATE-SIZE	Training Center	SUMMERFIELD	51 FTE
STATE-SIZE	Fort Walton District Office	FORT WALTON BEACH	51 FTE
CITY-NEAR	FL Winter Park	Winter Park	4,667 FTE
CITY-NEAR	AdventHealth Winter Park	Winter Park	1,627 FTE
CITY-NEAR	Winter Park Memorial Hospital	Winter Park	1,501 FTE
CITY-NEAR	Hubbard Construction Company	Winter Park	869 FTE
NAT-TCR	Main Plant	Somerset, KY	0.3 TCR
NAT-TCR	North Carolina Tobacco Manufacturing LLC	Stantonsburg, NC	0.3 TCR
NAT-TCR	ProChem Energy Services, Inc.	Healdton, OK	0.3 TCR
NAT-TCR	Quandel Enterprises	Harrisburg, PA	0.3 TCR
NAT-SIZE	Maneval Construction	Ingleside, IL	51 FTE
NAT-SIZE	Chicago Branch	Carol Stream, IL	51 FTE
NAT-SIZE	D.F. Tomasini Contractors, Inc.	Sussex, WI	51 FTE
NAT-SIZE	Massey Electric, Inc	Kingsport, TN	51 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.