Sheet metal work (except stampings) manufacturing · Georgia
Cordele Metal Works, Inc.
Cordele, GA · ~26 workers · 8 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 7.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Cordele Metal Works, Inc. runs at 240% of its industry's injury rate - far more dangerous than the typical Sheet metal work (except stampings) manufacturing workplace, earning a grade F.
Cordele Metal Works, Inc.: 7.9 TCR = 240% of Sheet metal work (except stampings) manufacturing BLS 3.3 · 8y Form 300A (see methodology below)
Cordele Metal Works, Inc. safety composite
Cordele Metal Works, Inc. scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on total case rate (tcr) (safer than 21%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
31/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 7.92 per 100 workers
Safer than 21% of industry peers
- DART rate
- F 3.68 per 100 workers
Safer than 29% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Cordele Metal Works, Inc.: 4.1 → 7.4 TCR
Peak year 2019 @ 17.3 TCR · DART/TCR 0.46× in 2024
Cordele Metal Works, Inc.'s TCR rose 3.3 from 4.1 in 2017 to 7.4 in 2024. Peak filing year was 2019 at 17.3 TCR. In 2024, DART was 0.46× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332322 · Cordele, GA ABOVE-IND · SMALL
Grade F · TCR 7.9 · 240% of ind
- DART 3.7 DART
- RANK #52/61
- PHOTO 3280 Rivergate, McMi…
- BOOK 8y book
- INJ 18 inj
- SIZE ~26 FTE
Nearest TCR peer: 3280 Rivergate, McMinnville, OR (0.0 TCR gap)
Read with this employer → · Industry book → · Georgia employers → · Look up another →
Cordele Metal Works, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Cordele Metal Works, Inc.
7.9 TCR
- 3280 Rivergate
3280 Rivergate, McMinnville, OR
7.9 TCR
- Steelhead Meta
Steelhead Metal Corp
7.9 TCR
- EPSM, LLC
EPSM, LLC
7.9 TCR
- Matthews Indus
Matthews Industries Inc
7.9 TCR
What this shows Cordele Metal Works, Inc. averages 7.9 TCR (240% of the Sheet metal work (except stampings) manufacturing BLS benchmark).
Cordele Metal Works, Inc. TCR series: 2017=4.1 · 2018=8.8 · 2019=17.3 · 2020=2.9 · 2021=8.7 · 2022=10.9 · 2023=3.2 · 2024=7.4 · BLS 3.3
Where Cordele Metal Works, Inc. falls in its industry
1,158 Sheet metal work (except stamp establishmentsSafer than 21% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #52 safest of 61 Sheet metal work (except stamp employers in Georgia.
Cordele Metal Works, Inc. has fewer employees than the Sheet metal work (except stampings) manu median and a higher injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 7.4 | 3.7 | 2 | 0 | 0 |
| 2023 | 3.2 | 3.2 | 1 | 0 | 0 |
| 2022 | 10.9 | 10.9 | 3 | 0 | 0 |
| 2021 | 8.7 | 8.7 | 2 | 0 | 0 |
| 2020 | 2.9 | 2.9 | 1 | 0 | 0 |
| 2019 | 17.3 | 2.9 | 6 | 0 | 0 |
| 2018 | 8.8 | 0.0 | 2 | 0 | 0 |
| 2017 | 4.1 | 0.0 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332322 · GA · Cordele
1,158 Sheet metal work (except stampings) manufacturing employers nationwide with a credible TCR · 14,941 rated employers in Georgia with headcount on file · 49 employers in Cordele, GA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | 3280 Rivergate, McMinnville, OR | 7.9 TCR |
| NAICS-TCR | Steelhead Metal Corp | 7.9 TCR |
| NAICS-TCR | EPSM, LLC | 7.9 TCR |
| NAICS-TCR | Matthews Industries Inc | 7.9 TCR |
| STATE-SIZE | FPL Food Chatel Farms | 26 FTE |
| STATE-SIZE | Unlimited Contract Services - Pine Grove, LA | 26 FTE |
| STATE-SIZE | Pilgrim's Pride Athens Hatchery | 26 FTE |
| STATE-SIZE | Hawkins Logging & Timber Co LLC | 26 FTE |
| CITY-NEAR | Crisp Regional Hospital | 560 FTE |
| CITY-NEAR | 1006 | 293 FTE |
| CITY-NEAR | Marvair | 290 FTE |
| CITY-NEAR | WM 1006 | 290 FTE |
| NAT-TCR | Roland's Electric Inc. | 7.9 TCR |
| NAT-TCR | 048-OMA | 7.9 TCR |
| NAT-TCR | Herrin City Hall | 7.9 TCR |
| NAT-TCR | Tennessee Pedigree Complex | 7.9 TCR |
| NAT-SIZE | Anti-Pest Company, Inc. | 26 FTE |
| NAT-SIZE | Scott Testing Inc. | 26 FTE |
| NAT-SIZE | Gosiger Machine Tools, LLC, Solon, OH | 26 FTE |
| NAT-SIZE | NPNE - Dover NH | 26 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.