Circular saws, woodworking-type, stationary, manufacturing · Oregon

Cranston Machinery Co Inc

Oak Grove, OR · ~39 workers · 6 years of OSHA Injury Tracking Application data.

A
Excellent Safety Record
0.8
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Cranston Machinery Co Inc runs at 25% of its industry's injury rate - far safer than the typical Circular saws, woodworking-type, stationary, manufacturing workplace, earning a grade A.

Cranston Machinery Co Inc: 0.8 TCR = 25% of Circular saws, woodworking-type, stationary, manufacturing BLS 3.3 · 6y Form 300A (see methodology below)

Cranston Machinery Co Inc safety composite

Cranston Machinery Co Inc scores strongest on total case rate (tcr) (safer than 95% of same-industry peers) and weakest on dart rate (safer than 36%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

63/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
A 0.83 per 100 workers

Safer than 95% of industry peers

DART rate
D 2.6 per 100 workers

Safer than 36% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Cranston Machinery Co Inc held a steady TCR band

Cranston Machinery Co Inc's TCR held near 0.2 from 2.4 in 2018 to 2.6 in 2023. In 2023, DART was 3.13× this establishment's average TCR (severity share of cases).

2018=2.4 · 2019=0.0 · 2020=0.0 · 2021=0.0 · 2022=0.0 · 2023=2.6

OSHA ITA Form 300A scorecard

Establishment book 333243 · Oak Grove, OR AT/BELOW-IND · SMALL

Grade A · TCR 0.8 · 25% of ind

  • DART 2.6 DART
  • RANK #1/10
  • PHOTO Sylvamo
  • BOOK 6y book
  • INJ 2 inj
  • SIZE ~39 FTE

Nearest TCR peer: Sylvamo (0.1 TCR gap)

Read with this employer → · Industry book → · Oregon employers → · Look up another →

Cranston Machinery Co Inc in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Cranston Machinery Co Inc averages 0.8 TCR (25% of the Circular saws, woodworking-type, stationary, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Cranston Machinery Co Inc TCR series: 2018=2.4 · 2019=0 · 2020=0 · 2021=0 · 2022=0 · 2023=2.6 · BLS 3.3

Where Cranston Machinery Co Inc falls in its industry

137 Circular saws, woodworking-typ establishments

Safer than 95% of graded establishments in this industry, whose median TCR is 3.5.

More dangerous than peersSafer than peers

Narrower to Oregon alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 10 Circular saws, woodworking-typ employers in Oregon.

Cranston Machinery Co Inc (39 employees, TCR 0.8) among 29 same-industry peers, split at the industry median of 62 employees and a TCR of 3.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400500 05101520 Average employees Total Case Rate Cranston Machinery Co Inc
Cranston Machinery Co Inc (39 employees, TCR 0.8) among 29 same-industry peers, split at the industry median of 62 employees and a TCR of 3.5

Cranston Machinery Co Inc has fewer employees than the Circular saws, woodworking-type, station median and a lower injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 2.6 2.6 1 0 0
2022 0.0 0.0 0 0 0
2021 0.0 0.0 0 0 0
2020 0.0 0.0 0 0 0
2019 0.0 0.0 0 0 0
2018 2.4 2.4 1 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

333243 · OR · Oak Grove

137 Circular saws, woodworking-type, stationary, manufacturing employers nationwide with a credible TCR · 8,031 rated employers in Oregon with headcount on file · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Sylvamo 0.8 TCR
NAICS-TCR Greenberg Casework Company 0.9 TCR
NAICS-TCR NASHVILLE - PPD 0.7 TCR
NAICS-TCR Texarkana Machine Inc -1 0.7 TCR
STATE-SIZE Harney Rock and Paving Company 39 FTE
STATE-SIZE Rose City Operations Center 39 FTE
STATE-SIZE Coos Bay North Bend Water Board 39 FTE
STATE-SIZE Griffin Construction LLC 39 FTE
CITY-NEAR 701-00240 272 FTE
NAT-TCR Unit #2460 0.8 TCR
NAT-TCR Unit #1399 0.8 TCR
NAT-TCR Unit #0644 0.8 TCR
NAT-TCR Honeywell Intelligrated 0.8 TCR
NAT-SIZE FL.SUNRI.16 - Ricoh Americas Holdings, Inc 39 FTE
NAT-SIZE Ashland Service Center-5B 39 FTE
NAT-SIZE DEJ Holdings, LLC 39 FTE
NAT-SIZE GEA Farm Technologies, Inc.-Romeoville 39 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2019, 2018. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.