Extruded, molded or lathe-cut rubber goods manufacturing · Oregon
Dacon Industries Co
Portland, OR · ~49 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Dacon Industries Co runs at 125% of its industry's injury rate - more dangerous than the typical Extruded, molded or lathe-cut rubber goods manufacturing workplace, earning a grade D.
Dacon Industries Co: 4.1 TCR = 125% of Extruded, molded or lathe-cut rubber goods manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
Dacon Industries Co safety composite
Dacon Industries Co scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 11%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
34/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.12 per 100 workers
Safer than 44% of industry peers
- DART rate
- F 6.42 per 100 workers
Safer than 11% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Dacon Industries Co: 6.0 → 6.4 TCR
Peak year 2024 @ 6.4 TCR · DART/TCR 1.56× in 2024
Dacon Industries Co's TCR rose 0.5 from 6.0 in 2022 to 6.4 in 2024. In 2024, DART was 1.56× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 326291 · Portland, OR ABOVE-IND · SMALL
Grade D · TCR 4.1 · 125% of ind
- DART 6.4 DART
- RANK #2/6
- PHOTO A-Korn Roller, Inc.
- BOOK 3y book
- INJ 4 inj
- SIZE ~49 FTE
Nearest TCR peer: A-Korn Roller, Inc. (0.0 TCR gap)
Read with this employer → · Industry book → · Oregon employers → · Look up another →
Dacon Industries Co in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Dacon Industries Co
4.1 TCR
- A-Korn Roller,
A-Korn Roller, Inc.
4.1 TCR
- Ritus Corporat
Ritus Corporation
4.1 TCR
- Avon Engineere
Avon Engineered Fabrications, LLC
4.1 TCR
- Michelin (Cams
Michelin (Camso)
4.1 TCR
What this shows Dacon Industries Co averages 4.1 TCR (125% of the Extruded, molded or lathe-cut rubber goods manufacturing BLS benchmark).
Dacon Industries Co TCR series: 2022=6 · 2023=0 · 2024=6.4 · BLS 3.3
Where Dacon Industries Co falls in its industry
266 Extruded, molded or lathe-cut establishmentsSafer than 44% of graded establishments in this industry, whose median TCR is 3.6.
Narrower to Oregon alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 6 Extruded, molded or lathe-cut employers in Oregon.
Dacon Industries Co has fewer employees than the Extruded, molded or lathe-cut rubber goo median and a higher injury rate than the industry's median TCR of 3.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 6.4 | 6.4 | 1 | 2 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 6.0 | 6.0 | 3 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
326291 · OR · Portland
266 Extruded, molded or lathe-cut rubber goods manufacturing employers nationwide with a credible TCR · 8,031 rated employers in Oregon with headcount on file · 1,728 employers in Portland, OR · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | A-Korn Roller, Inc. | 4.1 TCR |
| NAICS-TCR | Ritus Corporation | 4.1 TCR |
| NAICS-TCR | Avon Engineered Fabrications, LLC | 4.1 TCR |
| NAICS-TCR | Michelin (Camso) | 4.1 TCR |
| STATE-SIZE | Polehn Farms Inc | 49 FTE |
| STATE-SIZE | Fessler Nursery Company | 49 FTE |
| STATE-SIZE | UNIVERSAL SEED LLC | 49 FTE |
| STATE-SIZE | Sunnyview (Shared Services + MVS Admin + Warehouse) | 49 FTE |
| CITY-NEAR | OHSU Main Campus | 18,003 FTE |
| CITY-NEAR | OR349 PROVIDENCE ST VINCENT MEDICAL CTR-PORTLA | 4,033 FTE |
| CITY-NEAR | OR346 PROVIDENCE PORTLAND MEDICAL CTR-PORTLAND | 3,684 FTE |
| CITY-NEAR | 2252-00000530 | 3,498 FTE |
| NAT-TCR | Square-H Brands, Inc. | 4.1 TCR |
| NAT-TCR | Brookdale Clinton Memory Care | 4.1 TCR |
| NAT-TCR | Overhead Corporation | 4.1 TCR |
| NAT-TCR | Scarianos - Hammond | 4.1 TCR |
| NAT-SIZE | Firestone Walker Inc. -- Buellton CA | 49 FTE |
| NAT-SIZE | Hawaiian Host LLC | 49 FTE |
| NAT-SIZE | Hammond Lumber Company - Rochester | 49 FTE |
| NAT-SIZE | Village of Lake Bluff- Fire | 49 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.