Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe · Virginia

Dublin

Dublin, VA · ~24 workers · 3 years of OSHA Injury Tracking Application data.

D
Poor Safety Record
5.7
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Dublin runs at 173% of its industry's injury rate - more dangerous than the typical Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe workplace, earning a grade D.

Dublin: 5.7 TCR = 173% of Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe BLS 3.3 · 3y Form 300A (see methodology below)

Dublin safety composite

Dublin scores strongest on dart rate (safer than 81% of same-industry peers) and weakest on total case rate (tcr) (safer than 26%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

51/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 5.72 per 100 workers

Safer than 26% of industry peers

DART rate
B 0 per 100 workers

Safer than 81% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−4.4

2017→2024

Dublin injury rate improved

Dublin's TCR fell 4.4 from 8.6 in 2017 to 4.1 in 2024. Peak filing year was 2017 at 8.6 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

2017=8.6 · 2023=4.5 · 2024=4.1

OSHA ITA Form 300A scorecard

Establishment book 332996 · Dublin, VA ABOVE-IND · SMALL

Grade D · TCR 5.7 · 173% of ind

  • DART 0.0 DART
  • RANK #3/4
  • PHOTO Viega LLC - Kansas
  • BOOK 3y book
  • INJ 4 inj
  • SIZE ~24 FTE

Nearest TCR peer: Viega LLC - Kansas (0.0 TCR gap)

Read with this employer → · Industry book → · Virginia employers → · Look up another →

Dublin in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Dublin averages 5.7 TCR (173% of the Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Dublin TCR series: 2017=8.6 · 2023=4.5 · 2024=4.1 · BLS 3.3

Where Dublin falls in its industry

337 Pipe fabricating (i.e., bendin establishments

Safer than 26% of graded establishments in this industry, whose median TCR is 3.3.

More dangerous than peersSafer than peers

Narrower to Virginia alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 4 Pipe fabricating (i.e., bendin employers in Virginia.

Dublin (24 employees, TCR 5.7) among 29 same-industry peers, split at the industry median of 63 employees and a TCR of 3.3 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 02004006008001,000 05101520 Average employees Total Case Rate Dublin
Dublin (24 employees, TCR 5.7) among 29 same-industry peers, split at the industry median of 63 employees and a TCR of 3.3

Dublin has fewer employees than the Pipe fabricating (i.e., bending, cutting median and a higher injury rate than the industry's median TCR of 3.3. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 4.1 0.0 1 0 0
2023 4.5 0.0 1 0 0
2017 8.6 0.0 2 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332996 · VA · Dublin

337 Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe employers nationwide with a credible TCR · 12,673 rated employers in Virginia with headcount on file · 28 employers in Dublin, VA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Viega LLC - Kansas 5.7 TCR
NAICS-TCR Bedford 5.7 TCR
NAICS-TCR Russell's Tube Forming, Inc. 5.7 TCR
NAICS-TCR Bergen Pipe Supports 5.7 TCR
STATE-SIZE Smith Mountain Hydro 24 FTE
STATE-SIZE SHENANDOAH 24 FTE
STATE-SIZE Craig-Botetourt Electric Cooperative 24 FTE
STATE-SIZE Inner Space Systems, Inc. 24 FTE
CITY-NEAR Volvo Trucks NA New River Valley Plant 3,257 FTE
CITY-NEAR Phoenix Packaging Operations 416 FTE
CITY-NEAR 1652 269 FTE
CITY-NEAR WM 1652 267 FTE
NAT-TCR 2196 Sxb91 5.7 TCR
NAT-TCR Neenah Northeast, LLC 5.7 TCR
NAT-TCR Hajoca 554 5.7 TCR
NAT-TCR Ameritech Millworks 5.7 TCR
NAT-SIZE Ontario Exteriors,Inc. 24 FTE
NAT-SIZE Wichita West 24 FTE
NAT-SIZE Shed World LLC 24 FTE
NAT-SIZE Wright Home 24 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.