Metal and Ductwork Forming · Alabama
Eastern Sheet Metal.
Dothan, AL · ~75 workers · 7 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 6.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Eastern Sheet Metal. runs at 193% of its industry's injury rate - more dangerous than the typical Metal and Ductwork Forming workplace, earning a grade D.
Eastern Sheet Metal.: 6.4 TCR = 193% of Metal and Ductwork Forming BLS 3.3 · 7y Form 300A (see methodology below)
Eastern Sheet Metal. safety composite
Eastern Sheet Metal. scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 29%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
36/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 6.37 per 100 workers
Safer than 32% of industry peers
- DART rate
- F 3.71 per 100 workers
Safer than 29% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Eastern Sheet Metal.: 6.7 → 9.3 TCR
Peak year 2023 @ 9.3 TCR · DART/TCR 0.58× in 2023
Eastern Sheet Metal.'s TCR rose 2.5 from 6.7 in 2016 to 9.3 in 2023. In 2023, DART was 0.58× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332322 · Dothan, AL ABOVE-IND · SMALL
Grade D · TCR 6.4 · 193% of ind
- DART 3.7 DART
- RANK #10/15
- PHOTO 5 Point Fabrication,…
- BOOK 7y book
- INJ 31 inj
- SIZE ~75 FTE
Nearest TCR peer: 5 Point Fabrication, LLC (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Eastern Sheet Metal. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Eastern Sheet Metal.
6.4 TCR
- 5 Point Fabric
5 Point Fabrication, LLC
6.4 TCR
- Main Facility
Main Facility
6.4 TCR
- Gray Metal Sou
Gray Metal South, Inc.
6.4 TCR
- Equipto Electr
Equipto Electronics
6.4 TCR
What this shows Eastern Sheet Metal. averages 6.4 TCR (193% of the Metal and Ductwork Forming BLS benchmark).
Eastern Sheet Metal. TCR series: 2016=6.7 · 2017=9 · 2018=1.2 · 2020=6 · 2021=6.8 · 2022=5.6 · 2023=9.3 · BLS 3.3
Where Eastern Sheet Metal. falls in its industry
1,158 Metal and Ductwork Forming establishmentsSafer than 32% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #10 safest of 15 Metal and Ductwork Forming employers in Alabama.
Eastern Sheet Metal. has more employees than the Metal and Ductwork Forming median and a higher injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 9.3 | 3.7 | 5 | 0 | 0 |
| 2022 | 5.6 | 1.9 | 2 | 1 | 0 |
| 2021 | 6.8 | 3.4 | 4 | 0 | 0 |
| 2020 | 6.0 | 1.5 | 4 | 0 | 0 |
| 2018 | 1.2 | 0.0 | 1 | 0 | 0 |
| 2017 | 9.0 | 4.0 | 9 | 0 | 0 |
| 2016 | 6.7 | 1.1 | 6 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332322 · AL · Dothan
1,158 Metal and Ductwork Forming employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 183 employers in Dothan, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | 5 Point Fabrication, LLC | 6.4 TCR |
| NAICS-TCR | Main Facility | 6.4 TCR |
| NAICS-TCR | Gray Metal South, Inc. | 6.4 TCR |
| NAICS-TCR | Equipto Electronics | 6.4 TCR |
| STATE-SIZE | Worley Field Services at Sabic Burkville | 75 FTE |
| STATE-SIZE | Turner at Ascend Performance Materials Decatur AL | 75 FTE |
| STATE-SIZE | In & Out Welders Incorporated | 75 FTE |
| STATE-SIZE | BT Pelham | 75 FTE |
| CITY-NEAR | DSI SECURITY SERVICES CORPORATE | 2,918 FTE |
| CITY-NEAR | Dothan Plant | 1,233 FTE |
| CITY-NEAR | Dothan processing plant | 1,140 FTE |
| CITY-NEAR | 604 | 362 FTE |
| NAT-TCR | Paul A Castaldo Inc. Main Branch | 6.4 TCR |
| NAT-TCR | All-Phase Electric Supply (Pc3290) | 6.4 TCR |
| NAT-TCR | Fischer Paper Products, Inc. | 6.4 TCR |
| NAT-TCR | Construction Implements Depot | 6.4 TCR |
| NAT-SIZE | CL Middle School | 75 FTE |
| NAT-SIZE | Kamstrup Water Metering | 75 FTE |
| NAT-SIZE | Blackwell's Field | 75 FTE |
| NAT-SIZE | Kerner Ridge Assisted Living | 75 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.