Jigs and fixtures for use with machine tools manufacturing · North Carolina
Elizabeth Carbide of North Carolina
Lexington, NC · ~24 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Elizabeth Carbide of North Carolina runs at 90% of its industry's injury rate - about level with the typical Jigs and fixtures for use with machine tools manufacturing workplace, earning a grade C.
Elizabeth Carbide of North Carolina: 3.0 TCR = 90% of Jigs and fixtures for use with machine tools manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
Elizabeth Carbide of North Carolina safety composite
Elizabeth Carbide of North Carolina scores strongest on dart rate (safer than 74% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
61/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.96 per 100 workers
Safer than 56% of industry peers
- DART rate
- C 0 per 100 workers
Safer than 74% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−8.9
2020→2022
Elizabeth Carbide of North Carolina injury rate improved
Elizabeth Carbide of North Carolina's TCR fell 8.9 from 8.9 in 2020 to 0.0 in 2022. Peak filing year was 2020 at 8.9 TCR. In 2022, DART was 0× this establishment's average TCR (severity share of cases).
2020=8.9 · 2021=0.0 · 2022=0.0
OSHA ITA Form 300A scorecard
Establishment book 333514 · Lexington, NC AT/BELOW-IND · SMALL
Grade C · TCR 3.0 · 90% of ind
- DART 0.0 DART
- RANK #9/14
- PHOTO Ascent Aerospace - L…
- BOOK 3y book
- INJ 1 inj
- SIZE ~24 FTE
Nearest TCR peer: Ascent Aerospace - Lake Orion (ODY) (0.0 TCR gap)
Read with this employer → · Industry book → · North Carolina employers → · Look up another →
Elizabeth Carbide of North Carolina in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Elizabeth Carbide of North Carolina
3 TCR
- Ascent Aerospa
Ascent Aerospace - Lake Orion (ODY)
3 TCR
- ODC Tooling &
ODC Tooling & Molds
3 TCR
- Decatur Mold T
Decatur Mold Tool & Engineering, Inc.
3 TCR
- Marion Die & F
Marion Die & Fixture
2.9 TCR
What this shows Elizabeth Carbide of North Carolina averages 3.0 TCR (90% of the Jigs and fixtures for use with machine tools manufacturing BLS benchmark).
Elizabeth Carbide of North Carolina TCR series: 2020=8.9 · 2021=0 · 2022=0 · BLS 3.3
Where Elizabeth Carbide of North Carolina falls in its industry
387 Jigs and fixtures for use with establishmentsSafer than 56% of graded establishments in this industry, whose median TCR is 3.4.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #9 safest of 14 Jigs and fixtures for use with employers in North Carolina.
Elizabeth Carbide of North Carolina has fewer employees than the Jigs and fixtures for use with machine t median and a lower injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 8.9 | 8.9 | 1 | 1 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
333514 · NC · Lexington
387 Jigs and fixtures for use with machine tools manufacturing employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 120 employers in Lexington, NC · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Ascent Aerospace - Lake Orion (ODY) | 3.0 TCR |
| NAICS-TCR | ODC Tooling & Molds | 3.0 TCR |
| NAICS-TCR | Decatur Mold Tool & Engineering, Inc. | 3.0 TCR |
| NAICS-TCR | Marion Die & Fixture | 2.9 TCR |
| STATE-SIZE | Open Grounds Farm, Inc. | 24 FTE |
| STATE-SIZE | Super-Sod Charlotte | 24 FTE |
| STATE-SIZE | Holland Farms, Inc | 24 FTE |
| STATE-SIZE | CENTRAL LNM-EST | 24 FTE |
| CITY-NEAR | Davidson County Schools | 3,351 FTE |
| CITY-NEAR | Davidson County Government | 1,237 FTE |
| CITY-NEAR | Atrium Windows & Door | 910 FTE |
| CITY-NEAR | ASCO Power Technologies | 639 FTE |
| NAT-TCR | Oklahoma Waterproofing Co | 3.0 TCR |
| NAT-TCR | Florida Supplement | 3.0 TCR |
| NAT-TCR | Suncrest Assisted Living | 3.0 TCR |
| NAT-TCR | Kenan Transport 50066 Richmond | 3.0 TCR |
| NAT-SIZE | 9123-Mia-Primeflight Aviation Services, Inc. | 24 FTE |
| NAT-SIZE | Airworthy, Inc - Anaheim, CA | 24 FTE |
| NAT-SIZE | Puckett Power Systems-Gulfport | 24 FTE |
| NAT-SIZE | Lmmm Dallas #31, LTD. | 24 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.