Extruded, molded or lathe-cut rubber goods manufacturing · Arkansas

Finzer Roller - Arkansas

Searcy, AR · ~27 workers · 8 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.1
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Finzer Roller - Arkansas runs at 95% of its industry's injury rate - about level with the typical Extruded, molded or lathe-cut rubber goods manufacturing workplace, earning a grade C.

Finzer Roller - Arkansas: 3.1 TCR = 95% of Extruded, molded or lathe-cut rubber goods manufacturing BLS 3.3 · 8y Form 300A (see methodology below)

Finzer Roller - Arkansas safety composite

Finzer Roller - Arkansas scores strongest on total case rate (tcr) (safer than 58% of same-industry peers) and weakest on dart rate (safer than 26%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

45/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 3.14 per 100 workers

Safer than 58% of industry peers

DART rate
F 3.8 per 100 workers

Safer than 26% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Finzer Roller - Arkansas: 0.0 → 3.8 TCR

Peak year 2024 @ 3.8 TCR · DART/TCR 1.21× in 2024

Finzer Roller - Arkansas's TCR rose 3.8 from 0.0 in 2016 to 3.8 in 2024. In 2024, DART was 1.21× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 326291 · Searcy, AR AT/BELOW-IND · SMALL

Grade C · TCR 3.1 · 95% of ind

  • DART 3.8 DART
  • RANK P58
  • PHOTO Ludlow Composites Corp
  • BOOK 8y book
  • INJ 7 inj
  • SIZE ~27 FTE

Nearest TCR peer: Ludlow Composites Corp (0.0 TCR gap)

Read with this employer → · Industry book → · Arkansas employers → · Look up another →

Finzer Roller - Arkansas in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Finzer Roller - Arkansas averages 3.1 TCR (95% of the Extruded, molded or lathe-cut rubber goods manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Finzer Roller - Arkansas TCR series: 2016=0 · 2018=3.8 · 2019=3.4 · 2020=3.6 · 2021=3.5 · 2022=3.4 · 2023=3.6 · 2024=3.8 · BLS 3.3

Where Finzer Roller - Arkansas falls in its industry

266 Extruded, molded or lathe-cut establishments

Safer than 58% of graded establishments in this industry, whose median TCR is 3.6.

More dangerous than peersSafer than peers
Finzer Roller - Arkansas (27 employees, TCR 3.1) among 29 same-industry peers, split at the industry median of 81 employees and a TCR of 3.6 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600 0510152025 Average employees Total Case Rate Finzer Roller - Arkansas
Finzer Roller - Arkansas (27 employees, TCR 3.1) among 29 same-industry peers, split at the industry median of 81 employees and a TCR of 3.6

Finzer Roller - Arkansas has fewer employees than the Extruded, molded or lathe-cut rubber goo median and a lower injury rate than the industry's median TCR of 3.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 3.8 3.8 1 0 0
2023 3.6 3.6 1 0 0
2022 3.4 3.4 1 0 0
2021 3.5 3.5 1 0 0
2020 3.6 3.6 1 0 0
2019 3.4 3.4 1 0 0
2018 3.8 3.8 1 0 0
2016 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

326291 · AR · Searcy

266 Extruded, molded or lathe-cut rubber goods manufacturing employers nationwide with a credible TCR · 4,393 rated employers in Arkansas with headcount on file · 69 employers in Searcy, AR · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Ludlow Composites Corp 3.2 TCR
NAICS-TCR RPP LLC 3.1 TCR
NAICS-TCR Rubbercraft Corporation 3.2 TCR
NAICS-TCR VIP Plastics 3.1 TCR
STATE-SIZE 1301-Growout-Live Operations 27 FTE
STATE-SIZE Waldron Hatchery 27 FTE
STATE-SIZE Grannis/Broken Bow Growout 27 FTE
STATE-SIZE Dardanelle Growout 27 FTE
CITY-NEAR White County Medical Center 1,135 FTE
CITY-NEAR Unity Health - White County Med Center 1,040 FTE
CITY-NEAR 6018 817 FTE
CITY-NEAR WM 6018 767 FTE
NAT-TCR Midmark - Carthage 3.1 TCR
NAT-TCR 2 Park Avenue 3.1 TCR
NAT-TCR Weck's Paseo 3.1 TCR
NAT-TCR Alamo Food Rite 3.1 TCR
NAT-SIZE Cast Specialties, Inc. 27 FTE
NAT-SIZE Vanguard Frame VGF#2 27 FTE
NAT-SIZE Scott Enterprises, Inc. 27 FTE
NAT-SIZE Keystone Construction Corp 27 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.