Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing · Georgia
Gainesville Manufacturing Center
Gainesville, GA · ~369 workers · 3 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.2
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Gainesville Manufacturing Center runs at 66% of its industry's injury rate - safer than the typical Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing workplace, earning a grade B.
Gainesville Manufacturing Center: 2.2 TCR = 66% of Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
Gainesville Manufacturing Center safety composite
Gainesville Manufacturing Center scores strongest on total case rate (tcr) (safer than 68% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
60/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.19 per 100 workers
Safer than 68% of industry peers
- DART rate
- C 0.29 per 100 workers
Safer than 59% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−2.1
2018→2020
Gainesville Manufacturing Center injury rate improved
Gainesville Manufacturing Center's TCR fell 2.1 from 2.9 in 2018 to 0.9 in 2020. Peak filing year was 2018 at 2.9 TCR. In 2020, DART was 0.13× this establishment's average TCR (severity share of cases).
2018=2.9 · 2019=2.8 · 2020=0.9
OSHA ITA Form 300A scorecard
Establishment book 333241 · Gainesville, GA AT/BELOW-IND · MID
Grade B · TCR 2.2 · 66% of ind
- DART 0.3 DART
- RANK #4/7
- PHOTO Sani-Matic
- BOOK 3y book
- INJ 26 inj
- SIZE ~369 FTE
Nearest TCR peer: Sani-Matic (0.0 TCR gap)
Read with this employer → · Industry book → · Georgia employers → · Look up another →
Gainesville Manufacturing Center in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Gainesville Manufacturing Center
2.2 TCR
- Sani-Matic
Sani-Matic
2.2 TCR
- Marel, Inc. Se
Marel, Inc. Seattle
2.2 TCR
- Sterling Proce
Sterling Process Equipment & Services, Inc.
2.2 TCR
- GEA Process En
GEA Process Engineering Inc.
2.1 TCR
What this shows Gainesville Manufacturing Center averages 2.2 TCR (66% of the Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing BLS benchmark).
Gainesville Manufacturing Center TCR series: 2018=2.9 · 2019=2.8 · 2020=0.9 · BLS 3.3
Where Gainesville Manufacturing Center falls in its industry
215 Food choppers, grinders, mixer establishmentsSafer than 68% of graded establishments in this industry, whose median TCR is 3.0.
Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #4 safest of 7 Food choppers, grinders, mixer employers in Georgia.
Gainesville Manufacturing Center has more employees than the Food choppers, grinders, mixers, and sli median and a lower injury rate than the industry's median TCR of 3.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 0.9 | 0.3 | 3 | 0 | 0 |
| 2019 | 2.8 | 2.0 | 11 | 0 | 0 |
| 2018 | 2.9 | 0.7 | 12 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
333241 · GA · Gainesville
215 Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing employers nationwide with a credible TCR · 14,941 rated employers in Georgia with headcount on file · 306 employers in Gainesville, GA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Sani-Matic | 2.2 TCR |
| NAICS-TCR | Marel, Inc. Seattle | 2.2 TCR |
| NAICS-TCR | Sterling Process Equipment & Services, Inc. | 2.2 TCR |
| NAICS-TCR | GEA Process Engineering Inc. | 2.1 TCR |
| STATE-SIZE | 669 | 369 FTE |
| STATE-SIZE | Immersive Hub Operations, LLC | 369 FTE |
| STATE-SIZE | NetPlanner Systems Inc. | 368 FTE |
| STATE-SIZE | Porex Fairburn | 370 FTE |
| CITY-NEAR | Northeast Georgia Medical Center, Inc. | 5,384 FTE |
| CITY-NEAR | Kubota Manufacturing of America Corporation | 1,863 FTE |
| CITY-NEAR | Poultry Processing | 1,546 FTE |
| CITY-NEAR | Mar-Jac Poultry, Inc Processing Plant | 1,190 FTE |
| NAT-TCR | Harrah'S Louisiana Downs- Casino Slots & Racing | 2.2 TCR |
| NAT-TCR | Roses 418 | 2.2 TCR |
| NAT-TCR | Training Center | 2.2 TCR |
| NAT-TCR | Koppers Follansbee | 2.2 TCR |
| NAT-SIZE | Schneider Electric Knightdale | 369 FTE |
| NAT-SIZE | Orlando Health Rehabilitation Center | 369 FTE |
| NAT-SIZE | NBHX Trim USA | 369 FTE |
| NAT-SIZE | Employee Services - Corporate Shared Service Ctr | 369 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.