Pumps, oil field or well, manufacturing · Texas
Gardner Denver, Inc. PMI
Aledo, TX · ~32 workers · 3 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.6
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Gardner Denver, Inc. PMI runs at 49% of its industry's injury rate - far safer than the typical Pumps, oil field or well, manufacturing workplace, earning a grade A.
- A
- Excellent Safety Record
- 1.6
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 2
- recordable injuries tracked
Grade compares Gardner Denver, Inc. PMI's OSHA Total Case Rate of 1.6 to the Pumps, oil field or well, manufacturing BLS benchmark of 3.3 (49% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Gardner Denver, Inc. PMI's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Gardner Denver, Inc. PMI falls in its industry
212 Pumps, oil field or well, manu establishmentsSafer than 63% of graded establishments in this industry, whose median TCR is 2.2.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #10 safest of 25 Pumps, oil field or well, manu employers in Texas.
Trend analysis for Gardner Denver, Inc. PMI
Between 2018 and 2020, Gardner Denver, Inc. PMI's Total Case Rate held roughly steady from 0.0 to 0.0 recordable injuries per 100 full-time workers, a 0% change across 2 years of OSHA reporting.
The safest year on record was 2018, at a TCR of 0.0, while 2019 saw the highest rate, at 4.8, a spread of 4.8 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, Gardner Denver, Inc. PMI recorded 2 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 2 injuries shown on this page for Gardner Denver, Inc. PMI are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333911 - Pumps, oil field or well, manufacturing.
DART Rate, Transparent Calculation (2020)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 44,734 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Gardner Denver, Inc. PMI (this establishment) | 1.61 | OSHA ITA Form 300A, 3-year avg |
| Oil-well and oil-field pumps manufacturing industry avg | 3.30 | BLS IIF, NAICS 333911 |
| Texas state avg (all industries) | 3.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Gardner Denver, Inc. PMI to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 4.8 | 0.0 | 2 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Gardner Denver, Inc. PMI's reported OSHA injury record, strong versus its Pumps, oil field or well, manufacturing peers, but not a guarantee about any single site today.
- At 49% of the Pumps, oil field or well, manufacturing benchmark, Gardner Denver, Inc. PMI reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Pumps, oil field or well, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Gardner Denver, Inc. PMI's safety grade?
How many injuries has Gardner Denver, Inc. PMI reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Texas, and by nearby establishments in Aledo - a different peer set than the category browse links below.
Similar TCR (~1.6)
Similar size (~32 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.