Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing · Wisconsin
General Stamping and Metal Works Tomah
Tomah, WI · ~88 workers · 2 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
General Stamping and Metal Works Tomah runs at 176% of its industry's injury rate - more dangerous than the typical Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing workplace, earning a grade D.
General Stamping and Metal Works Tomah: 5.8 TCR = 176% of Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS 3.3 · 2y Form 300A (see methodology below)
General Stamping and Metal Works Tomah safety composite
General Stamping and Metal Works Tomah scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on total case rate (tcr) (safer than 32%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
42/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 5.82 per 100 workers
Safer than 32% of industry peers
- DART rate
- D 1.74 per 100 workers
Safer than 47% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
General Stamping and Metal Works Tomah: 4.7 → 7.0 TCR
Peak year 2020 @ 7.0 TCR · DART/TCR 0.3× in 2020
General Stamping and Metal Works Tomah's TCR rose 2.3 from 4.7 in 2019 to 7.0 in 2020. In 2020, DART was 0.3× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332313 · Tomah, WI ABOVE-IND · SMALL
Grade D · TCR 5.8 · 176% of ind
- DART 1.7 DART
- RANK #25/45
- PHOTO LaserForm
- BOOK 2y book
- INJ 3 inj
- SIZE ~88 FTE
Nearest TCR peer: LaserForm (0.0 TCR gap)
Read with this employer → · Industry book → · Wisconsin employers → · Look up another →
General Stamping and Metal Works Tomah in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
General Stamping and Metal Works Tomah
5.8 TCR
- LaserForm
LaserForm
5.8 TCR
- ci Metal Fabri
ci Metal Fabrication
5.8 TCR
- Cupples J & J
Cupples J & J Co. Inc
5.8 TCR
- Bloomer Machin
Bloomer Machine & Fab Inc
5.8 TCR
What this shows General Stamping and Metal Works Tomah averages 5.8 TCR (176% of the Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS benchmark).
General Stamping and Metal Works Tomah TCR series: 2019=4.7 · 2020=7 · BLS 3.3
Where General Stamping and Metal Works Tomah falls in its industry
449 Plate work (e.g., bending, cut establishmentsSafer than 32% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Wisconsin alone (the establishments it most directly competes with for workers and contracts): ranked #25 safest of 45 Plate work (e.g., bending, cut employers in Wisconsin.
General Stamping and Metal Works Tomah has more employees than the Plate work (e.g., bending, cutting, punc median and a higher injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 7.0 | 1.7 | 1 | 3 | 0 |
| 2019 | 4.7 | 4.7 | 2 | 3 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332313 · WI · Tomah
449 Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing employers nationwide with a credible TCR · 12,834 rated employers in Wisconsin with headcount on file · 61 employers in Tomah, WI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | LaserForm | 5.8 TCR |
| NAICS-TCR | ci Metal Fabrication | 5.8 TCR |
| NAICS-TCR | Cupples J & J Co. Inc | 5.8 TCR |
| NAICS-TCR | Bloomer Machine & Fab Inc | 5.8 TCR |
| STATE-SIZE | Eden Stone Co. | 88 FTE |
| STATE-SIZE | Construction | 88 FTE |
| STATE-SIZE | Indianhead Pipeline Services, LLC | 88 FTE |
| STATE-SIZE | Affiliated Construction Services, Inc. | 88 FTE |
| CITY-NEAR | WM 6085 | 819 FTE |
| CITY-NEAR | 6085 | 791 FTE |
| CITY-NEAR | The Toro Company - Tomah Manufacturing Plant | 772 FTE |
| CITY-NEAR | Tomah IG | 513 FTE |
| NAT-TCR | Brookhaven, MS | 5.8 TCR |
| NAT-TCR | Magnolia Gardens Assisted Living | 5.8 TCR |
| NAT-TCR | Food Smart #7 | 5.8 TCR |
| NAT-TCR | 1600 Motor Pkwy | 5.8 TCR |
| NAT-SIZE | Oak Grove Center | 88 FTE |
| NAT-SIZE | Newport Beach Surgery Center | 88 FTE |
| NAT-SIZE | Manor Home | 88 FTE |
| NAT-SIZE | Sigma - Cream Ridge | 88 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.