Employer · Wisconsin
General Stamping & Metalworks - Tomah
Tomah, WI · ~55 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
General Stamping & Metalworks - Tomah runs at 93% of its industry's injury rate - about level with the typical industry workplace, earning a grade C.
General Stamping & Metalworks - Tomah: 3.1 TCR = 93% of industry BLS 3.3 · 3y Form 300A (see methodology below)
General Stamping & Metalworks - Tomah safety composite
General Stamping & Metalworks - Tomah scores strongest on total case rate (tcr) (safer than 65% of same-industry peers) and weakest on dart rate (safer than 49%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
56/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 3.07 per 100 workers
Safer than 65% of industry peers
- DART rate
- D 1.6 per 100 workers
Safer than 49% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−2.8
2016→2018
General Stamping & Metalworks - Tomah injury rate improved
General Stamping & Metalworks - Tomah's TCR fell 2.8 from 6.0 in 2016 to 3.2 in 2018. Peak filing year was 2016 at 6.0 TCR. In 2018, DART was 0.52× this establishment's average TCR (severity share of cases).
2016=6.0 · 2017=0.0 · 2018=3.2
OSHA ITA Form 300A scorecard
Establishment book 332313 · Tomah, WI AT/BELOW-IND · SMALL
Grade C · TCR 3.1 · 93% of ind
- DART 1.6 DART
- RANK #11/45
- PHOTO Metalforms LLC.
- BOOK 3y book
- INJ 5 inj
- SIZE ~55 FTE
Nearest TCR peer: Metalforms LLC. (0.0 TCR gap)
Read with this employer → · Industry book → · Wisconsin employers → · Look up another →
General Stamping & Metalworks - Tomah in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
General Stamping & Metalworks - Tomah
3.1 TCR
- Metalforms LLC
Metalforms LLC.
3.1 TCR
- Tricon Wear So
Tricon Wear Solutions Birmingham
3.1 TCR
- Hahn & Clay Se
Hahn & Clay Services ltd
3.1 TCR
- Benicia Fabric
Benicia Fabrication & Machine, Inc.
3.1 TCR
What this shows General Stamping & Metalworks - Tomah averages 3.1 TCR (93% of the industry BLS benchmark).
General Stamping & Metalworks - Tomah TCR series: 2016=6 · 2017=0 · 2018=3.2 · BLS 3.3
Where General Stamping & Metalworks - Tomah falls in its industry
449 industry establishmentsSafer than 65% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Wisconsin alone (the establishments it most directly competes with for workers and contracts): ranked #11 safest of 45 industry employers in Wisconsin.
General Stamping & Metalworks - Tomah has more employees than the industry median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2018 | 3.2 | 1.6 | 2 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 6.0 | 2.0 | 3 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332313 · WI · Tomah
449 industry employers nationwide with a credible TCR · 12,834 rated employers in Wisconsin with headcount on file · 61 employers in Tomah, WI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Metalforms LLC. | 3.1 TCR |
| NAICS-TCR | Tricon Wear Solutions Birmingham | 3.1 TCR |
| NAICS-TCR | Hahn & Clay Services ltd | 3.1 TCR |
| NAICS-TCR | Benicia Fabrication & Machine, Inc. | 3.1 TCR |
| STATE-SIZE | Siemers Holstein Farm, Inc. - Main Farm | 55 FTE |
| STATE-SIZE | Substation | 55 FTE |
| STATE-SIZE | Luamben Green Service Corp | 55 FTE |
| STATE-SIZE | KOHLER SERVICE ORGANIZATION | 55 FTE |
| CITY-NEAR | WM 6085 | 819 FTE |
| CITY-NEAR | 6085 | 791 FTE |
| CITY-NEAR | The Toro Company - Tomah Manufacturing Plant | 772 FTE |
| CITY-NEAR | Tomah IG | 513 FTE |
| NAT-TCR | Mid South Baking Company TX | 3.1 TCR |
| NAT-TCR | Bedford Park Sheet | 3.1 TCR |
| NAT-TCR | SG360- Gilman Facility | 3.1 TCR |
| NAT-TCR | Concast Birmingham Inc | 3.1 TCR |
| NAT-SIZE | Plant Two and Four | 55 FTE |
| NAT-SIZE | Fluid Connectors : Kent | 55 FTE |
| NAT-SIZE | Aqua North Carolina, Inc. - Denver | 55 FTE |
| NAT-SIZE | Myrtle Creek D/C #094 | 55 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.