Cutting dies, metalworking, manufacturing · New Jersey

Ggb, LLC

Thorofare, NJ · ~285 workers · 6 years of OSHA Injury Tracking Application data.

A
Excellent Safety Record
1.3
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Ggb, LLC runs at 40% of its industry's injury rate - far safer than the typical Cutting dies, metalworking, manufacturing workplace, earning a grade A.

Ggb, LLC: 1.3 TCR = 40% of Cutting dies, metalworking, manufacturing BLS 3.3 · 6y Form 300A (see methodology below)

Ggb, LLC safety composite

Ggb, LLC scores strongest on total case rate (tcr) (safer than 85% of same-industry peers) and weakest on dart rate (safer than 41%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

61/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
B 1.33 per 100 workers

Safer than 85% of industry peers

DART rate
D 1.08 per 100 workers

Safer than 41% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Ggb, LLC: 1.1 → 2.5 TCR

Peak year 2023 @ 2.5 TCR · DART/TCR 0.81× in 2023

Ggb, LLC's TCR rose 1.4 from 1.1 in 2016 to 2.5 in 2023. In 2023, DART was 0.81× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 333514 · Thorofare, NJ AT/BELOW-IND · MID

Grade A · TCR 1.3 · 40% of ind

  • DART 1.1 DART
  • RANK #2/6
  • PHOTO B-K Tool and Design,…
  • BOOK 6y book
  • INJ 25 inj
  • SIZE ~285 FTE

Nearest TCR peer: B-K Tool and Design, Inc. (0.0 TCR gap)

Read with this employer → · Industry book → · New Jersey employers → · Look up another →

Ggb, LLC in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Ggb, LLC averages 1.3 TCR (40% of the Cutting dies, metalworking, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Ggb, LLC TCR series: 2016=1.1 · 2017=0.4 · 2019=1.3 · 2020=1.1 · 2021=1.6 · 2023=2.5 · BLS 3.3

Where Ggb, LLC falls in its industry

387 Cutting dies, metalworking, ma establishments

Safer than 85% of graded establishments in this industry, whose median TCR is 3.4.

More dangerous than peersSafer than peers

Narrower to New Jersey alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 6 Cutting dies, metalworking, ma employers in New Jersey.

Ggb, LLC (285 employees, TCR 1.3) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 3.4 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400500 051015 Average employees Total Case Rate Ggb, LLC
Ggb, LLC (285 employees, TCR 1.3) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 3.4

Ggb, LLC has more employees than the Cutting dies, metalworking, manufacturin median and a lower injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 2.5 1.1 4 3 0
2021 1.6 0.9 5 0 0
2020 1.1 0.7 3 0 0
2019 1.3 0.3 5 0 0
2017 0.4 0.3 4 0 0
2016 1.1 0.3 4 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

333514 · NJ · Thorofare

387 Cutting dies, metalworking, manufacturing employers nationwide with a credible TCR · 11,201 rated employers in New Jersey with headcount on file · 11 employers in Thorofare, NJ · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR B-K Tool and Design, Inc. 1.3 TCR
NAICS-TCR MGS Mfg. Group, Inc. - Tooling 1.3 TCR
NAICS-TCR Integrated Die Manufacturing (IDM) 1.3 TCR
NAICS-TCR Tombigbee Tooling, Inc. 1.4 TCR
STATE-SIZE Interstate Connecting Components/Trek Connect - A Division of Heilind Mil-Aero 285 FTE
STATE-SIZE SHOPRITE OF WEST DEPTFORD 285 FTE
STATE-SIZE Uncle Giuseppe's Ramsey, Inc. 285 FTE
STATE-SIZE Linden Business & Technology Center 285 FTE
CITY-NEAR Checkpoint Systems Inc 309 FTE
CITY-NEAR J. Ambrogi Foods 210 FTE
CITY-NEAR International Paper Retail Packaging and Display - Thorofare 200 FTE
CITY-NEAR Troemner, LLC 152 FTE
NAT-TCR Southeast Valve, Inc. 1.3 TCR
NAT-TCR SKF USA Inc. - Muskegon 1.3 TCR
NAT-TCR Bay Hills Golf Club 1.3 TCR
NAT-TCR Safeway Construction Enterprises LLC 1.3 TCR
NAT-SIZE Market Basket #67 285 FTE
NAT-SIZE Elkay Plumbing Products 285 FTE
NAT-SIZE DPW 285 FTE
NAT-SIZE Breezy Point International Inc. 285 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2021, 2020, 2019, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.