Machine shops · Mississippi
Glenn Machine Works, Inc
Columbus, MS · ~185 workers · 2 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 0.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Glenn Machine Works, Inc runs at 22% of its industry's injury rate - far safer than the typical Machine shops workplace, earning a grade A.
- A
- Excellent Safety Record
- 0.7
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 3
- recordable injuries tracked
Grade compares Glenn Machine Works, Inc's OSHA Total Case Rate of 0.7 to the Machine shops BLS benchmark of 3.3 (22% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Glenn Machine Works, Inc's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Glenn Machine Works, Inc falls in its industry
2,037 Machine shops establishmentsSafer than 85% of graded establishments in this industry, whose median TCR is 3.1.
Narrower to Mississippi alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 4 Machine shops employers in Mississippi.
Trend analysis for Glenn Machine Works, Inc
Between 2019 and 2021, Glenn Machine Works, Inc's Total Case Rate improved from 0.9 to 0.6 recordable injuries per 100 full-time workers, a 33% decrease across 2 years of OSHA reporting.
The safest year on record was 2021, at a TCR of 0.6, while 2019 saw the highest rate, at 0.9, a spread of 0.3 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Glenn Machine Works, Inc recorded 3 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 3 injuries shown on this page for Glenn Machine Works, Inc are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332710 - Machine shops.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 346,795 hours worked = 0.58 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Glenn Machine Works, Inc (this establishment) | 0.72 | OSHA ITA Form 300A, 2-year avg |
| Machine shops industry avg | 3.30 | BLS IIF, NAICS 332710 |
| Mississippi state avg (all industries) | 3.72 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Glenn Machine Works, Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 0.6 | 0.6 | 1 | 0 | 0 |
| 2019 | 0.9 | 0.9 | 2 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Glenn Machine Works, Inc's reported OSHA injury record, strong versus its Machine shops peers, but not a guarantee about any single site today.
- At 22% of the Machine shops benchmark, Glenn Machine Works, Inc reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Machine shops sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Glenn Machine Works, Inc's safety grade?
How many injuries has Glenn Machine Works, Inc reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Mississippi, and by nearby establishments in Columbus - a different peer set than the category browse links below.
Similar TCR (~0.7)
Similar size (~185 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.