Masonry contractors · North Carolina
Griffin Masonry Inc
Charlotte, NC · ~300 workers · 5 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.2
- Avg TCR
- 2.8
- Industry avg
- 1
- Fatality
The verdict
Griffin Masonry Inc runs at 115% of its industry's injury rate - about level with the typical Masonry contractors workplace, earning a grade C.
- C
- Average Safety Record
- 3.2
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 1
- worker fatalities on record
Grade compares Griffin Masonry Inc's OSHA Total Case Rate of 3.2 to the Masonry contractors BLS benchmark of 2.8 (115% of benchmark) across 5 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Griffin Masonry Inc's yearly Total Case Rate, against the 2.8 industry benchmark.
Where Griffin Masonry Inc falls in its industry
804 Masonry contractors establishmentsSafer than 51% of graded establishments in this industry, whose median TCR is 3.3.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #17 safest of 20 Masonry contractors employers in North Carolina.
Trend analysis for Griffin Masonry Inc
Between 2016 and 2021, Griffin Masonry Inc's Total Case Rate improved from 7.5 to 2.4 recordable injuries per 100 full-time workers, a 68% decrease across 5 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 0.3, while 2016 saw the highest rate, at 7.5, a spread of 7.1 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 5 reporting years, Griffin Masonry Inc recorded 46 total injuries and illnesses and 1 fatality. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 46 injuries, and 1 fatality shown on this page for Griffin Masonry Inc are sourced from its own 5 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238140 - Masonry contractors.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
6 DART incidents × 200,000 ÷ 588,648 hours worked = 2.04 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Griffin Masonry Inc (this establishment) | 3.22 | OSHA ITA Form 300A, 5-year avg |
| Masonry contractors industry avg | 2.80 | BLS IIF, NAICS 238140 |
| North Carolina state avg (all industries) | 3.89 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Griffin Masonry Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 8 reportable incidents · 7 injuries, 0 illnesses, 1 fatality - OSHA inspection records (case numbers)
- 2020: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 11 reportable incidents · 11 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 21 reportable incidents · 21 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 2.4 | 2.0 | 7 | 0 | 1 |
| 2020 | 0.3 | 0.3 | 1 | 0 | 0 |
| 2019 | 3.6 | 3.0 | 11 | 0 | 0 |
| 2018 | 2.3 | 2.3 | 6 | 0 | 0 |
| 2016 | 7.5 | 0.7 | 21 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Griffin Masonry Inc's reported OSHA injury record versus its Masonry contractors peers, not a verdict on whether any single site is safe today.
- At 115% of the Masonry contractors benchmark, Griffin Masonry Inc reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Masonry contractors sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Griffin Masonry Inc's safety grade?
How many injuries has Griffin Masonry Inc reported?
Similar Employers
Matched by safety record across the industry, by workforce size within North Carolina, and by nearby establishments in Charlotte - a different peer set than the category browse links below.
Similar TCR (~3.2)
Similar size (~300 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.