Animal feed mills (except dog and cat) manufacturing · Texas

Hi Pro Feeds Comanche

Comanche, TX · ~44 workers · 7 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.0
Avg TCR
3.9
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Hi Pro Feeds Comanche runs at 53% of its industry's injury rate - safer than the typical Animal feed mills (except dog and cat) manufacturing workplace, earning a grade B.

Hi Pro Feeds Comanche: 2.0 TCR = 53% of Animal feed mills (except dog and cat) manufacturing BLS 3.9 · 7y Form 300A (see methodology below)

Hi Pro Feeds Comanche safety composite

Hi Pro Feeds Comanche scores strongest on total case rate (tcr) (safer than 75% of same-industry peers) and weakest on dart rate (safer than 45%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

59/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
B 2.05 per 100 workers

Safer than 75% of industry peers

DART rate
D 1.99 per 100 workers

Safer than 45% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Hi Pro Feeds Comanche: 1.6 → 2.0 TCR

Peak year 2022 @ 5.6 TCR · DART/TCR 0.97× in 2024

Hi Pro Feeds Comanche's TCR rose 0.4 from 1.6 in 2018 to 2.0 in 2024. Peak filing year was 2022 at 5.6 TCR. In 2024, DART was 0.97× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 311119 · Comanche, TX AT/BELOW-IND · SMALL

Grade B · TCR 2.0 · 53% of ind

  • DART 2.0 DART
  • RANK #20/51
  • PHOTO Kalmbach Feeds, Inc.
  • BOOK 7y book
  • INJ 8 inj
  • SIZE ~44 FTE

Nearest TCR peer: Kalmbach Feeds, Inc. (0.0 TCR gap)

Read with this employer → · Industry book → · Texas employers → · Look up another →

Hi Pro Feeds Comanche in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Hi Pro Feeds Comanche averages 2.0 TCR (53% of the Animal feed mills (except dog and cat) manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Hi Pro Feeds Comanche TCR series: 2018=1.6 · 2019=1.6 · 2020=0 · 2021=0 · 2022=5.6 · 2023=3.6 · 2024=2 · BLS 3.9

Where Hi Pro Feeds Comanche falls in its industry

756 Animal feed mills (except dog establishments

Safer than 75% of graded establishments in this industry, whose median TCR is 3.5.

More dangerous than peersSafer than peers

Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #20 safest of 51 Animal feed mills (except dog employers in Texas.

Hi Pro Feeds Comanche (44 employees, TCR 2.0) among 29 same-industry peers, split at the industry median of 36 employees and a TCR of 3.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150200 051015 Average employees Total Case Rate Hi Pro Feeds Comanche
Hi Pro Feeds Comanche (44 employees, TCR 2.0) among 29 same-industry peers, split at the industry median of 36 employees and a TCR of 3.5

Hi Pro Feeds Comanche has more employees than the Animal feed mills (except dog and cat) m median and a lower injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 2.0 2.0 1 0 0
2023 3.6 3.6 2 0 0
2022 5.6 5.6 3 0 0
2021 0.0 0.0 0 0 0
2020 0.0 0.0 0 0 0
2019 1.6 0.0 1 0 0
2018 1.6 0.0 1 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

311119 · TX · Comanche

756 Animal feed mills (except dog and cat) manufacturing employers nationwide with a credible TCR · 38,394 rated employers in Texas with headcount on file · 12 employers in Comanche, TX · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Kalmbach Feeds, Inc. 2.0 TCR
NAICS-TCR Bio-Vet, Inc 2.0 TCR
NAICS-TCR Belstra Milling Company, Inc. 2.0 TCR
NAICS-TCR Zeigler Bros. Inc. 2.0 TCR
STATE-SIZE Corteva - Lubbock Research 44 FTE
STATE-SIZE WRANGLER FEED YARD 44 FTE
STATE-SIZE Devon Energy Corporation - Cresson 44 FTE
STATE-SIZE Driver Directional, Inc. 44 FTE
CITY-NEAR Western Hills Healthcare Residence 796 FTE
CITY-NEAR Dollins Pecan Co., Inc. dba Durham Pecan Company 133 FTE
CITY-NEAR PATE'S HARDWARE, INC 107 FTE
CITY-NEAR Brookshire's #093 94 FTE
NAT-TCR Jenkins Ford Lincoln of Crystal River 2.0 TCR
NAT-TCR Lithko Restoration Technologies LLC 2.0 TCR
NAT-TCR Fccin Group Sales 2.0 TCR
NAT-TCR CGI Federal Inc - Seattle Passport Agency 2.0 TCR
NAT-SIZE Jenkins Mazda 44 FTE
NAT-SIZE Rentex Inc. 44 FTE
NAT-SIZE Schaefer Box & Pallet Co 44 FTE
NAT-SIZE Region 1-Clackamas 44 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.