Machine shops · South Dakota
Horizontal Machining & Mfg. Inc.
Huron, SD · ~87 workers · 9 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 10.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Horizontal Machining & Mfg. Inc. runs at 323% of its industry's injury rate - far more dangerous than the typical Machine shops workplace, earning a grade F.
Horizontal Machining & Mfg. Inc.: 10.7 TCR = 323% of Machine shops BLS 3.3 · 9y Form 300A (see methodology below)
Horizontal Machining & Mfg. Inc. safety composite
Horizontal Machining & Mfg. Inc. scores strongest on dart rate (safer than 75% of same-industry peers) and weakest on total case rate (tcr) (safer than 6%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
41/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 10.65 per 100 workers
Safer than 6% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 75% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−2.4
2016→2024
Horizontal Machining & Mfg. Inc. injury rate improved
Horizontal Machining & Mfg. Inc.'s TCR fell 2.4 from 7.6 in 2016 to 5.2 in 2024. Peak filing year was 2017 at 22.0 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2016=7.6 · 2017=22.0 · 2018=14.6 · 2019=9.7 · 2020=11.3 · 2021=7.2 · 2022=12.1 · 2023=6.0 · 2024=5.2
OSHA ITA Form 300A scorecard
Establishment book 332710 · Huron, SD ABOVE-IND · SMALL
Grade F · TCR 10.7 · 323% of ind
- DART 0.0 DART
- RANK #6/6
- PHOTO M & M Precision Mach…
- BOOK 9y book
- INJ 62 inj
- SIZE ~87 FTE
Nearest TCR peer: M & M Precision Machining Inc (0.0 TCR gap)
Read with this employer → · Industry book → · South Dakota employers → · Look up another →
Horizontal Machining & Mfg. Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Horizontal Machining & Mfg. Inc.
10.7 TCR
- M & M Precisio
M & M Precision Machining Inc
10.7 TCR
- Dubuque Screw
Dubuque Screw Products
10.7 TCR
- McCurdy Tool
McCurdy Tool
10.7 TCR
- Tatco Machine
Tatco Machine
10.6 TCR
What this shows Horizontal Machining & Mfg. Inc. averages 10.7 TCR (323% of the Machine shops BLS benchmark).
Horizontal Machining & Mfg. Inc. TCR series: 2016=7.6 · 2017=22 · 2018=14.6 · 2019=9.7 · 2020=11.3 · 2021=7.2 · 2022=12.1 · 2023=6 · 2024=5.2 · BLS 3.3
Where Horizontal Machining & Mfg. Inc. falls in its industry
1,821 Machine shops establishmentsSafer than 6% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to South Dakota alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 6 Machine shops employers in South Dakota.
Horizontal Machining & Mfg. Inc. has more employees than the Machine shops median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 5.2 | 0.0 | 3 | 2 | 0 |
| 2023 | 6.0 | 0.0 | 5 | 1 | 0 |
| 2022 | 12.1 | 4.0 | 10 | 2 | 0 |
| 2021 | 7.2 | 6.2 | 7 | 0 | 0 |
| 2020 | 11.3 | 2.8 | 8 | 0 | 0 |
| 2019 | 9.7 | 0.0 | 4 | 2 | 0 |
| 2018 | 14.6 | 5.3 | 7 | 4 | 0 |
| 2017 | 22.0 | 3.1 | 12 | 2 | 0 |
| 2016 | 7.6 | 7.6 | 6 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332710 · SD · Huron
1,821 Machine shops employers nationwide with a credible TCR · 1,778 rated employers in South Dakota with headcount on file · 43 employers in Huron, SD · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | M & M Precision Machining Inc | 10.7 TCR |
| NAICS-TCR | Dubuque Screw Products | 10.7 TCR |
| NAICS-TCR | Tatco Machine | 10.6 TCR |
| NAICS-TCR | McCurdy Tool | 10.7 TCR |
| STATE-SIZE | BHP - RC Service Center (SD012) | 87 FTE |
| STATE-SIZE | 104423 - Deuel Harvest Wind Farm 300MW | 87 FTE |
| STATE-SIZE | Vermeer Corporation - Freeman | 87 FTE |
| STATE-SIZE | Sioux Area Metro | 87 FTE |
| CITY-NEAR | Dakota Provisions | 902 FTE |
| CITY-NEAR | Huron Regional Medical Center | 343 FTE |
| CITY-NEAR | WM 3853 | 252 FTE |
| CITY-NEAR | Huron Area Center for Independence | 246 FTE |
| NAT-TCR | Hoosier Christian Village | 10.7 TCR |
| NAT-TCR | R.B. Pallet Service, Inc. | 10.7 TCR |
| NAT-TCR | TXD015 | 10.7 TCR |
| NAT-TCR | WAS018 | 10.7 TCR |
| NAT-SIZE | 20/20 Plumbing & Heating, Inc. | 87 FTE |
| NAT-SIZE | Chown Hardware | 87 FTE |
| NAT-SIZE | David M. Maines Associates, Inc. | 87 FTE |
| NAT-SIZE | Sigma Marble Dallas | 87 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.