Extruded, molded or lathe-cut rubber goods manufacturing · Alabama

Hyundai Polytech America

Eufaula, AL · ~61 workers · 3 years of OSHA Injury Tracking Application data.

C
Average Safety Record
2.9
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Hyundai Polytech America runs at 86% of its industry's injury rate - about level with the typical Extruded, molded or lathe-cut rubber goods manufacturing workplace, earning a grade C.

Hyundai Polytech America: 2.9 TCR = 86% of Extruded, molded or lathe-cut rubber goods manufacturing BLS 3.3 · 3y Form 300A (see methodology below)

Hyundai Polytech America safety composite

Hyundai Polytech America scores strongest on total case rate (tcr) (safer than 62% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

58/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 2.85 per 100 workers

Safer than 62% of industry peers

DART rate
C 1.13 per 100 workers

Safer than 58% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Hyundai Polytech America: 4.6 → 155.7 TCR

Peak year 2019 @ 155.7 TCR · DART/TCR 54.63× in 2019

Hyundai Polytech America's TCR rose 151.1 from 4.6 in 2016 to 155.7 in 2019. In 2019, DART was 54.63× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 326291 · Eufaula, AL AT/BELOW-IND · SMALL

Grade C · TCR 2.9 · 86% of ind

  • DART 155.7 DART
  • RANK #3/5
  • PHOTO Armacell, LLC - Meba…
  • BOOK 3y book
  • INJ 5 inj
  • SIZE ~61 FTE

Nearest TCR peer: Armacell, LLC - Mebane, NC (0.0 TCR gap)

Read with this employer → · Industry book → · Alabama employers → · Look up another →

Hyundai Polytech America in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Hyundai Polytech America averages 2.9 TCR (86% of the Extruded, molded or lathe-cut rubber goods manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Hyundai Polytech America TCR series: 2016=4.6 · 2017=1.1 · 2019=155.7 · BLS 3.3

Where Hyundai Polytech America falls in its industry

266 Extruded, molded or lathe-cut establishments

Safer than 62% of graded establishments in this industry, whose median TCR is 3.6.

More dangerous than peersSafer than peers

Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 5 Extruded, molded or lathe-cut employers in Alabama.

Hyundai Polytech America (61 employees, TCR 2.9) among 29 same-industry peers, split at the industry median of 81 employees and a TCR of 3.6 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600 0510152025 Average employees Total Case Rate Hyundai Polytech America
Hyundai Polytech America (61 employees, TCR 2.9) among 29 same-industry peers, split at the industry median of 81 employees and a TCR of 3.6

Hyundai Polytech America has fewer employees than the Extruded, molded or lathe-cut rubber goo median and a lower injury rate than the industry's median TCR of 3.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2019 155.7 155.7 2 0 0
2017 1.1 1.1 1 0 0
2016 4.6 4.6 2 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

326291 · AL · Eufaula

266 Extruded, molded or lathe-cut rubber goods manufacturing employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 22 employers in Eufaula, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Armacell, LLC - Mebane, NC 2.9 TCR
NAICS-TCR Mantua Ohio 2.8 TCR
NAICS-TCR MIDWEST RUBBER COMPANY 2.8 TCR
NAICS-TCR ContiTech 2.8 TCR
STATE-SIZE Koch Foods Crossville Hatchery 61 FTE
STATE-SIZE Capstone Building Corp. Office 61 FTE
STATE-SIZE Legacy Equipment 61 FTE
STATE-SIZE Barlovento, LLC 61 FTE
CITY-NEAR American Buildings Company South Division 319 FTE
CITY-NEAR Eufaula 307 FTE
CITY-NEAR WM 1638 235 FTE
CITY-NEAR 1638 223 FTE
NAT-TCR Whitlock - Boston 2.9 TCR
NAT-TCR Tampa TPA 2.9 TCR
NAT-TCR Secure Roofing & Solar Inc. 2.9 TCR
NAT-TCR Essex Nursing & Rehab 2.9 TCR
NAT-SIZE Ach Memorial Hospital Schuyler 61 FTE
NAT-SIZE Blanchard Machinery Company - Summerville Heavy 61 FTE
NAT-SIZE Max & Erma's Perrysburg 61 FTE
NAT-SIZE Max & Erma's Sawmill 61 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2019, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.