Maintenance and repair services, aircraft (except factory conversion, factory overhaul, factory rebuilding) · Texas

International Aerospace Coatings

Amarillo, TX · ~156 workers · 3 years of OSHA Injury Tracking Application data.

D
Poor Safety Record
8.6
Avg TCR
4.5
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

International Aerospace Coatings runs at 191% of its industry's injury rate - more dangerous than the typical Maintenance and repair services, aircraft (except factory conversion, factory overhaul, factory rebuilding) workplace, earning a grade D.

International Aerospace Coatings: 8.6 TCR = 191% of Maintenance and repair services, aircraft (except factory conversion, factory overhaul, factory rebuilding) BLS 4.5 · 3y Form 300A (see methodology below)

International Aerospace Coatings safety composite

International Aerospace Coatings scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on total case rate (tcr) (safer than 10%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

F

23/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 8.6 per 100 workers

Safer than 10% of industry peers

DART rate
F 4.75 per 100 workers

Safer than 18% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

International Aerospace Coatings: 7.2 → 9.0 TCR

Peak year 2023 @ 9.6 TCR · DART/TCR 0.55× in 2024

International Aerospace Coatings's TCR rose 1.8 from 7.2 in 2022 to 9.0 in 2024. Peak filing year was 2023 at 9.6 TCR. In 2024, DART was 0.55× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 488190 · Amarillo, TX ABOVE-IND · MID

Grade D · TCR 8.6 · 191% of ind

  • DART 4.8 DART
  • RANK #92/101
  • PHOTO ATL-ITP
  • BOOK 3y book
  • INJ 45 inj
  • SIZE ~156 FTE

Nearest TCR peer: ATL-ITP (0.0 TCR gap)

Read with this employer → · Industry book → · Texas employers → · Look up another →

International Aerospace Coatings in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows International Aerospace Coatings averages 8.6 TCR (191% of the Maintenance and repair services, aircraft (except factory conversion, factory overhaul, factory rebuilding) BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

International Aerospace Coatings TCR series: 2022=7.2 · 2023=9.6 · 2024=9 · BLS 4.5

Where International Aerospace Coatings falls in its industry

992 Maintenance and repair service establishments

Safer than 10% of graded establishments in this industry, whose median TCR is 3.2.

More dangerous than peersSafer than peers

Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #92 safest of 101 Maintenance and repair service employers in Texas.

International Aerospace Coatings (156 employees, TCR 8.6) among 29 same-industry peers, split at the industry median of 67 employees and a TCR of 3.2 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 05001,0001,500 05101520 Average employees Total Case Rate International Aerospace Coatings
International Aerospace Coatings (156 employees, TCR 8.6) among 29 same-industry peers, split at the industry median of 67 employees and a TCR of 3.2

International Aerospace Coatings has more employees than the Maintenance and repair services, aircraf median and a higher injury rate than the industry's median TCR of 3.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 9.0 4.8 17 0 0
2023 9.6 9.6 17 0 0
2022 7.2 3.9 11 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

488190 · TX · Amarillo

992 Maintenance and repair services, aircraft (except factory conversion, factory overhaul, factory rebuilding) employers nationwide with a credible TCR · 38,394 rated employers in Texas with headcount on file · 351 employers in Amarillo, TX · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR ATL-ITP 8.6 TCR
NAICS-TCR DAL-ITP 8.5 TCR
NAICS-TCR SW-20730222-MX SBN - SOUTH BEND, IN 8.5 TCR
NAICS-TCR SW-20730146-MX MKE - MILWAUKEE, WI - SW 8.5 TCR
STATE-SIZE Scout Downhole 156 FTE
STATE-SIZE Larrett Inc. 156 FTE
STATE-SIZE Belt Construction of Texas, LLC 156 FTE
STATE-SIZE Graco Mechanical 156 FTE
CITY-NEAR Amarillo Plant 3,771 FTE
CITY-NEAR BSA Hospital LLC 2,790 FTE
CITY-NEAR 2576-12071000-12071 1,839 FTE
CITY-NEAR 2576-30 1,492 FTE
NAT-TCR San Fernando 8.6 TCR
NAT-TCR Delta - SLC 8.6 TCR
NAT-TCR J&K Dairy, LLC 8.6 TCR
NAT-TCR Salina Ks - 3279 8.6 TCR
NAT-SIZE Covenant Living of Colorado 156 FTE
NAT-SIZE Honor Foods - Philadelphia 156 FTE
NAT-SIZE 2667 Somerville 156 FTE
NAT-SIZE 6378 E Hialeah 156 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.