Metal stampings (except automotive, cans, coins), unfinished, manufacturing · New York
International Ordnance Technologies, Inc.
Jamestown, NY · ~32 workers · 6 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
International Ordnance Technologies, Inc. runs at 168% of its industry's injury rate - more dangerous than the typical Metal stampings (except automotive, cans, coins), unfinished, manufacturing workplace, earning a grade D.
International Ordnance Technologies, Inc.: 5.5 TCR = 168% of Metal stampings (except automotive, cans, coins), unfinished, manufacturing BLS 3.3 · 6y Form 300A (see methodology below)
International Ordnance Technologies, Inc. safety composite
International Ordnance Technologies, Inc. scores strongest on dart rate (safer than 82% of same-industry peers) and weakest on total case rate (tcr) (safer than 45%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
59/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 5.55 per 100 workers
Safer than 45% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 82% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−17.4
2017→2024
International Ordnance Technologies, Inc. injury rate improved
International Ordnance Technologies, Inc.'s TCR fell 17.4 from 17.4 in 2017 to 0.0 in 2024. Peak filing year was 2017 at 17.4 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2017=17.4 · 2019=0.0 · 2020=7.7 · 2022=4.4 · 2023=3.8 · 2024=0.0
OSHA ITA Form 300A scorecard
Establishment book 332119 · Jamestown, NY ABOVE-IND · SMALL
Grade D · TCR 5.5 · 168% of ind
- DART 0.0 DART
- RANK #14/19
- PHOTO Stanco Metal Product…
- BOOK 6y book
- INJ 9 inj
- SIZE ~32 FTE
Nearest TCR peer: Stanco Metal Products - New Mexico (0.0 TCR gap)
Read with this employer → · Industry book → · New York employers → · Look up another →
International Ordnance Technologies, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Stanco Metal P
Stanco Metal Products - New Mexico
5.6 TCR
- North Central
North Central Stamping, Inc.
5.6 TCR
- This site
International Ordnance Technologies, Inc.
5.5 TCR
- Stewart EFI CT
Stewart EFI CT
5.5 TCR
- MiTek USA, Inc
MiTek USA, Inc.
5.5 TCR
What this shows International Ordnance Technologies, Inc. averages 5.5 TCR (168% of the Metal stampings (except automotive, cans, coins), unfinished, manufacturing BLS benchmark).
International Ordnance Technologies, Inc. TCR series: 2017=17.4 · 2019=0 · 2020=7.7 · 2022=4.4 · 2023=3.8 · 2024=0 · BLS 3.3
Where International Ordnance Technologies, Inc. falls in its industry
477 Metal stampings (except automo establishmentsSafer than 45% of graded establishments in this industry, whose median TCR is 5.1.
Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #14 safest of 19 Metal stampings (except automo employers in New York.
International Ordnance Technologies, Inc. has fewer employees than the Metal stampings (except automotive, cans median and a higher injury rate than the industry's median TCR of 5.1. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 3.8 | 0.0 | 1 | 0 | 0 |
| 2022 | 4.4 | 4.4 | 1 | 0 | 0 |
| 2020 | 7.7 | 3.9 | 2 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 17.4 | 10.4 | 5 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332119 · NY · Jamestown
477 Metal stampings (except automotive, cans, coins), unfinished, manufacturing employers nationwide with a credible TCR · 21,008 rated employers in New York with headcount on file · 104 employers in Jamestown, NY · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Stanco Metal Products - New Mexico | 5.6 TCR |
| NAICS-TCR | North Central Stamping, Inc. | 5.6 TCR |
| NAICS-TCR | Stewart EFI CT | 5.5 TCR |
| NAICS-TCR | MiTek USA, Inc. | 5.5 TCR |
| STATE-SIZE | Schofield Farms LLC | 32 FTE |
| STATE-SIZE | CSS Farms - Bliss | 32 FTE |
| STATE-SIZE | 1482 West Genesee Road, Baldwinsville NY | 32 FTE |
| STATE-SIZE | 166 Gary Dr., Brockport, NY 14420 | 32 FTE |
| CITY-NEAR | UPMC Chautauqua at WCA | 988 FTE |
| CITY-NEAR | Bush Industries | 378 FTE |
| CITY-NEAR | The Resource Center - Dunham | 352 FTE |
| CITY-NEAR | Wegmans Jamestown 088 | 310 FTE |
| NAT-TCR | Forge Group Michigan | 5.5 TCR |
| NAT-TCR | Asheville 022 | 5.5 TCR |
| NAT-TCR | USACAPITOL | 5.5 TCR |
| NAT-TCR | Salt Lake City 2810 | 5.5 TCR |
| NAT-SIZE | Countryside Woodworking | 32 FTE |
| NAT-SIZE | Queen Creek Ready Mix | 32 FTE |
| NAT-SIZE | TSS at Hunt Refining Company Tuscaloosa AL | 32 FTE |
| NAT-SIZE | Apples (Wellington) | 32 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.