Machine shops · Minnesota

Izza Manufacturing and Coatings

Buffalo, MN · ~3 workers · 5 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
10.3
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Izza Manufacturing and Coatings runs at 313% of its industry's injury rate - far more dangerous than the typical Machine shops workplace, earning a grade F.

Izza Manufacturing and Coatings: 10.3 TCR = 313% of Machine shops BLS 3.3 · 5y Form 300A (see methodology below)

Izza Manufacturing and Coatings safety composite

Izza Manufacturing and Coatings scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on total case rate (tcr) (safer than 6%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

F

17/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 10.33 per 100 workers

Safer than 6% of industry peers

DART rate
F 6 per 100 workers

Safer than 7% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Izza Manufacturing and Coatings: 0.0 → 18.0 TCR

Peak year 2022 @ 18.0 TCR · DART/TCR 0.58× in 2022

Izza Manufacturing and Coatings's TCR rose 18.0 from 0.0 in 2017 to 18.0 in 2022. In 2022, DART was 0.58× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332710 · Buffalo, MN ABOVE-IND · SMALL

Grade F · TCR 10.3 · 313% of ind

  • DART 6.0 DART
  • RANK #82/92
  • PHOTO Ska Fabricating - Fa…
  • BOOK 5y book
  • INJ 12 inj
  • SIZE ~3 FTE

Nearest TCR peer: Ska Fabricating - Fabricating (0.0 TCR gap)

Read with this employer → · Industry book → · Minnesota employers → · Look up another →

Izza Manufacturing and Coatings in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Izza Manufacturing and Coatings averages 10.3 TCR (313% of the Machine shops BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Izza Manufacturing and Coatings TCR series: 2017=0 · 2018=11 · 2019=14.5 · 2021=8.2 · 2022=18 · BLS 3.3

Where Izza Manufacturing and Coatings falls in its industry

1,821 Machine shops establishments

Safer than 6% of graded establishments in this industry, whose median TCR is 3.5.

More dangerous than peersSafer than peers

Narrower to Minnesota alone (the establishments it most directly competes with for workers and contracts): ranked #82 safest of 92 Machine shops employers in Minnesota.

Izza Manufacturing and Coatings (3 employees, TCR 10.3) among 29 same-industry peers, split at the industry median of 48 employees and a TCR of 3.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150200250 051015 Average employees Total Case Rate Izza Manufacturing and Coatings
Izza Manufacturing and Coatings (3 employees, TCR 10.3) among 29 same-industry peers, split at the industry median of 48 employees and a TCR of 3.5

Izza Manufacturing and Coatings has fewer employees than the Machine shops median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2022 18.0 6.0 3 0 0
2021 8.2 0.0 4 0 0
2019 14.5 0.0 3 0 0
2018 11.0 0.0 2 0 0
2017 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332710 · MN · Buffalo

1,821 Machine shops employers nationwide with a credible TCR · 15,828 rated employers in Minnesota with headcount on file · 74 employers in Buffalo, MN · 4 cross-state NAT-TCR peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Ska Fabricating - Fabricating 10.3 TCR
NAICS-TCR Marton Precision Manufacturing LLC 10.3 TCR
NAICS-TCR Dixie Precision Inc 10.3 TCR
NAICS-TCR Gear Co. of America, Inc. 10.3 TCR
STATE-SIZE Alexandria, MN 3 FTE
STATE-SIZE PHS - SummerHouse of Shoreview 3 FTE
STATE-SIZE St. Paul Downtown YMCA 3 FTE
STATE-SIZE St Paul, MN 4 FTE
CITY-NEAR Health One Buffalo (Buffalo Hospital) 532 FTE
CITY-NEAR Health One Buffalo 500 FTE
CITY-NEAR WM 1577 404 FTE
CITY-NEAR 1577 320 FTE
NAT-TCR Stop & Shop 100720 10.3 TCR
NAT-TCR Store 0700 10.3 TCR
NAT-TCR Tony's Plumbing Service 10.3 TCR
NAT-TCR Sdrap - Rapid City 10.3 TCR

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2022, 2021, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.