HVAC (heating, ventilation and air-conditioning) contractors · Ohio

J Feldkamp Design Build

Cincinnati, OH · ~111 workers · 7 years of OSHA Injury Tracking Application data.

B
Good Safety Record
1.8
Avg TCR
2.8
Industry avg
0
Fatalities

The verdict

J Feldkamp Design Build runs at 63% of its industry's injury rate - safer than the typical HVAC (heating, ventilation and air-conditioning) contractors workplace, earning a grade B.

B
Good Safety Record
1.8
avg TCR · per 100 workers
2.8
industry benchmark (BLS)
14
recordable injuries tracked

Grade compares J Feldkamp Design Build's OSHA Total Case Rate of 1.8 to the HVAC (heating, ventilation and air-conditioning) contractors BLS benchmark of 2.8 (63% of benchmark) across 7 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

J Feldkamp Design Build's yearly Total Case Rate, against the 2.8 industry benchmark.

-1012345 2017201820202021202220232024 02.8 Industry benchmarkJ Feldkamp Design Build TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 238220.

Where J Feldkamp Design Build falls in its industry

6,536 HVAC (heating, ventilation and establishments

Safer than 65% of graded establishments in this industry, whose median TCR is 2.8.

More dangerous than peersSafer than peers

Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #129 safest of 344 HVAC (heating, ventilation and employers in Ohio.

Trend analysis for J Feldkamp Design Build

Between 2017 and 2024, J Feldkamp Design Build's Total Case Rate improved from 2.3 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 7 years of OSHA reporting.

The safest year on record was 2018, at a TCR of 0.0, while 2020 saw the highest rate, at 4.1, a spread of 4.1 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 7 reporting years, J Feldkamp Design Build recorded 14 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 14 injuries, 1 illnesses shown on this page for J Feldkamp Design Build are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238220 - HVAC (heating, ventilation and air-conditioning) contractors.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 241,930 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
J Feldkamp Design Build (this establishment) 1.76 OSHA ITA Form 300A, 7-year avg
Mechanical contractors industry avg 2.80 BLS IIF, NAICS 238220
Ohio state avg (all industries) 3.90 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by J Feldkamp Design Build to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.0 0.0 0 0 0
2023 1.7 0.9 2 0 0
2022 0.8 0.8 1 0 0
2021 3.4 0.7 5 0 0
2020 4.1 4.1 5 0 0
2018 0.0 0.0 0 0 0
2017 2.3 2.3 1 1 0

What this grade means for you

Use this grade as a relative read on J Feldkamp Design Build's reported OSHA injury record, strong versus its HVAC (heating, ventilation and air-conditioning) contractors peers, but not a guarantee about any single site today.

  • At 63% of the HVAC (heating, ventilation and air-conditioning) contractors benchmark, J Feldkamp Design Build reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider HVAC (heating, ventilation and air-conditioning) contractors sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is J Feldkamp Design Build's safety grade?
J Feldkamp Design Build has a safety grade of B (Good Safety Record). This grade is based on their average Total Case Rate (TCR) of 1.8 compared to the BLS industry benchmark of 2.8 for HVAC (heating, ventilation and air-conditioning) contractors.
How many injuries has J Feldkamp Design Build reported?
J Feldkamp Design Build has reported 14 total injuries and 0 fatalities across 7 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Ohio, and by nearby establishments in Cincinnati - a different peer set than the category browse links below.

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.