Manufacture of fluid control systems · Oklahoma

John Crane Fluid Control Systems

Tulsa, OK · ~85 workers · 6 years of OSHA Injury Tracking Application data.

A
Excellent Safety Record
0.6
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

John Crane Fluid Control Systems runs at 19% of its industry's injury rate - far safer than the typical Manufacture of fluid control systems workplace, earning a grade A.

John Crane Fluid Control Systems: 0.6 TCR = 19% of Manufacture of fluid control systems BLS 3.3 · 6y Form 300A (see methodology below)

John Crane Fluid Control Systems safety composite

John Crane Fluid Control Systems scores strongest on total case rate (tcr) (safer than 93% of same-industry peers) and weakest on dart rate (safer than 47%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

66/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
A 0.63 per 100 workers

Safer than 93% of industry peers

DART rate
D 1.46 per 100 workers

Safer than 47% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

John Crane Fluid Control Systems: 0.0 → 1.5 TCR

Peak year 2021 @ 1.5 TCR · DART/TCR 2.32× in 2021

John Crane Fluid Control Systems's TCR rose 1.5 from 0.0 in 2016 to 1.5 in 2021. In 2021, DART was 2.32× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332996 · Tulsa, OK AT/BELOW-IND · SMALL

Grade A · TCR 0.6 · 19% of ind

  • DART 1.5 DART
  • RANK #1/11
  • PHOTO TI Fluid Systems
  • BOOK 6y book
  • INJ 3 inj
  • SIZE ~85 FTE

Nearest TCR peer: TI Fluid Systems (0.0 TCR gap)

Read with this employer → · Industry book → · Oklahoma employers → · Look up another →

John Crane Fluid Control Systems in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows John Crane Fluid Control Systems averages 0.6 TCR (19% of the Manufacture of fluid control systems BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

John Crane Fluid Control Systems TCR series: 2016=0 · 2017=0 · 2018=1.1 · 2019=0 · 2020=1.2 · 2021=1.5 · BLS 3.3

Where John Crane Fluid Control Systems falls in its industry

337 Manufacture of fluid control s establishments

Safer than 93% of graded establishments in this industry, whose median TCR is 3.3.

More dangerous than peersSafer than peers

Narrower to Oklahoma alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 11 Manufacture of fluid control s employers in Oklahoma.

John Crane Fluid Control Systems (85 employees, TCR 0.6) among 29 same-industry peers, split at the industry median of 63 employees and a TCR of 3.3 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 02004006008001,000 05101520 Average employees Total Case Rate John Crane Fluid Control Systems
John Crane Fluid Control Systems (85 employees, TCR 0.6) among 29 same-industry peers, split at the industry median of 63 employees and a TCR of 3.3

John Crane Fluid Control Systems has more employees than the Manufacture of fluid control systems median and a lower injury rate than the industry's median TCR of 3.3. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2021 1.5 1.5 1 0 0
2020 1.2 0.0 1 0 0
2019 0.0 0.0 0 0 0
2018 1.1 1.1 1 0 0
2017 0.0 0.0 0 0 0
2016 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332996 · OK · Tulsa

337 Manufacture of fluid control systems employers nationwide with a credible TCR · 5,320 rated employers in Oklahoma with headcount on file · 1,004 employers in Tulsa, OK · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR TI Fluid Systems 0.6 TCR
NAICS-TCR Shaw Walker LA, LLC 0.6 TCR
NAICS-TCR Hackney Ladish INC 0.7 TCR
NAICS-TCR Nelson Global 0.6 TCR
STATE-SIZE Quapaw 85 FTE
STATE-SIZE Central Expanded Metal 85 FTE
STATE-SIZE Wilco Machine & Fab Inc. 85 FTE
STATE-SIZE World Water Works, Inc. 85 FTE
CITY-NEAR Saint Francis Hospital, Inc. 6,668 FTE
CITY-NEAR H&P IDC - U.S. Land 6,014 FTE
CITY-NEAR TUL-TULSA-MAINTENANCE BASE 5,184 FTE
CITY-NEAR 4795-AA-TUL-TULSA-TUL-TRML 4,794 FTE
NAT-TCR Abiohc-015-Abilene Home Care 0.6 TCR
NAT-TCR Just $ave #136 0.6 TCR
NAT-TCR Fairhaven 0.6 TCR
NAT-TCR Rinker INDCP3 0.6 TCR
NAT-SIZE Charleston, SC HVAC 85 FTE
NAT-SIZE US169: Portland 448 - SG 85 FTE
NAT-SIZE SAS Services Colorado Inc. 85 FTE
NAT-SIZE Central Broward Office 85 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.
Data sourced from official public datasets. See our methodology for details.