Drinking fountains (except mechanically refrigerated), metal, manufacturing · Ohio
Johnson Matthey Process Technologies, Inc.
Ravenna, OH · ~43 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Johnson Matthey Process Technologies, Inc. runs at 101% of its industry's injury rate - about level with the typical Drinking fountains (except mechanically refrigerated), metal, manufacturing workplace, earning a grade C.
- C
- Average Safety Record
- 3.3
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 3
- recordable injuries tracked
Grade compares Johnson Matthey Process Technologies, Inc.'s OSHA Total Case Rate of 3.3 to the Drinking fountains (except mechanically refrigerated), metal, manufacturing BLS benchmark of 3.3 (101% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Johnson Matthey Process Technologies, Inc.'s yearly Total Case Rate, against the 3.3 industry benchmark.
Where Johnson Matthey Process Technologies, Inc. falls in its industry
880 Drinking fountains (except mec establishmentsSafer than 59% of graded establishments in this industry, whose median TCR is 4.2.
Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #32 safest of 82 Drinking fountains (except mec employers in Ohio.
Trend analysis for Johnson Matthey Process Technologies, Inc.
Between 2016 and 2019, Johnson Matthey Process Technologies, Inc.'s Total Case Rate worsened from 3.0 to 3.6 recordable injuries per 100 full-time workers, a 19% increase across 3 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 3.0, while 2019 saw the highest rate, at 3.6, a spread of 0.6 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Johnson Matthey Process Technologies, Inc. recorded 3 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 3 injuries shown on this page for Johnson Matthey Process Technologies, Inc. are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332999 - Drinking fountains (except mechanically refrigerated), metal, manufacturing.
DART Rate, Transparent Calculation (2019)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 110,240 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Johnson Matthey Process Technologies, Inc. (this establishment) | 3.34 | OSHA ITA Form 300A, 2-year avg |
| Machine bases, metal, manufacturing industry avg | 3.30 | BLS IIF, NAICS 332999 |
| Ohio state avg (all industries) | 3.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Johnson Matthey Process Technologies, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2019: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 3.6 | 0.0 | 2 | 0 | 0 |
| 2016 | 3.0 | 3.0 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Johnson Matthey Process Technologies, Inc.'s reported OSHA injury record versus its Drinking fountains (except mechanically refrigerated), metal, manufacturing peers, not a verdict on whether any single site is safe today.
- At 101% of the Drinking fountains (except mechanically refrigerated), metal, manufacturing benchmark, Johnson Matthey Process Technologies, Inc. reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Drinking fountains (except mechanically refrigerated), metal, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Johnson Matthey Process Technologies, Inc.'s safety grade?
How many injuries has Johnson Matthey Process Technologies, Inc. reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Ohio, and by nearby establishments in Ravenna - a different peer set than the category browse links below.
Similar TCR (~3.3)
Similar size (~43 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.