Awnings, rigid plastics or fiberglass, manufacturing · Alabama
Kumi Manufacturing Alabama LLC
Clanton, AL · ~249 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Kumi Manufacturing Alabama LLC runs at 150% of its industry's injury rate - more dangerous than the typical Awnings, rigid plastics or fiberglass, manufacturing workplace, earning a grade D.
Kumi Manufacturing Alabama LLC: 5.0 TCR = 150% of Awnings, rigid plastics or fiberglass, manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
Kumi Manufacturing Alabama LLC safety composite
Kumi Manufacturing Alabama LLC scores strongest on dart rate (safer than 52% of same-industry peers) and weakest on total case rate (tcr) (safer than 32%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
44/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 4.96 per 100 workers
Safer than 32% of industry peers
- DART rate
- D 1.51 per 100 workers
Safer than 52% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−6.7
2016→2024
Kumi Manufacturing Alabama LLC injury rate improved
Kumi Manufacturing Alabama LLC's TCR fell 6.7 from 8.8 in 2016 to 2.1 in 2024. Peak filing year was 2016 at 8.8 TCR. In 2024, DART was 0.3× this establishment's average TCR (severity share of cases).
2016=8.8 · 2017=7.5 · 2018=7.1 · 2019=5.2 · 2020=6.4 · 2021=2.1 · 2022=2.0 · 2023=3.5 · 2024=2.1
OSHA ITA Form 300A scorecard
Establishment book 326199 · Clanton, AL ABOVE-IND · MID
Grade D · TCR 5.0 · 150% of ind
- DART 1.5 DART
- RANK #44/65
- PHOTO Sii - Lincoln; Plant 2
- BOOK 9y book
- INJ 110 inj
- SIZE ~249 FTE
Nearest TCR peer: Sii - Lincoln; Plant 2 (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Kumi Manufacturing Alabama LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Kumi Manufacturing Alabama LLC
5 TCR
- Sii - Lincoln;
Sii - Lincoln; Plant 2
5 TCR
- Accurate Molde
Accurate Molded Plastics
5 TCR
- Norwesco - St.
Norwesco - St. Bonifacius
5 TCR
- FGS/Bellingham
FGS/Bellingham
5 TCR
What this shows Kumi Manufacturing Alabama LLC averages 5.0 TCR (150% of the Awnings, rigid plastics or fiberglass, manufacturing BLS benchmark).
Kumi Manufacturing Alabama LLC TCR series: 2016=8.8 · 2017=7.5 · 2018=7.1 · 2019=5.2 · 2020=6.4 · 2021=2.1 · 2022=2 · 2023=3.5 · 2024=2.1 · BLS 3.3
Where Kumi Manufacturing Alabama LLC falls in its industry
2,838 Awnings, rigid plastics or fib establishmentsSafer than 32% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #44 safest of 65 Awnings, rigid plastics or fib employers in Alabama.
Kumi Manufacturing Alabama LLC has more employees than the Awnings, rigid plastics or fiberglass, m median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 2.1 | 1.5 | 7 | 0 | 0 |
| 2023 | 3.5 | 3.5 | 11 | 0 | 0 |
| 2022 | 2.0 | 1.5 | 4 | 0 | 0 |
| 2021 | 2.1 | 1.6 | 4 | 0 | 0 |
| 2020 | 6.4 | 5.4 | 13 | 0 | 0 |
| 2019 | 5.2 | 3.5 | 12 | 0 | 0 |
| 2018 | 7.1 | 5.3 | 16 | 0 | 0 |
| 2017 | 7.5 | 6.7 | 19 | 0 | 0 |
| 2016 | 8.8 | 5.8 | 24 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
326199 · AL · Clanton
2,838 Awnings, rigid plastics or fiberglass, manufacturing employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 24 employers in Clanton, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Sii - Lincoln; Plant 2 | 5.0 TCR |
| NAICS-TCR | Accurate Molded Plastics | 5.0 TCR |
| NAICS-TCR | Norwesco - St. Bonifacius | 5.0 TCR |
| NAICS-TCR | FGS/Bellingham | 5.0 TCR |
| STATE-SIZE | Unipres Alabama, Inc | 249 FTE |
| STATE-SIZE | 1620 | 249 FTE |
| STATE-SIZE | 315 | 249 FTE |
| STATE-SIZE | RRS Vance | 249 FTE |
| CITY-NEAR | US Adient, LLC Clanton | 775 FTE |
| CITY-NEAR | Adient | 739 FTE |
| CITY-NEAR | AS-Clanton-12434 (Adient-Clanton, AL) | 728 FTE |
| CITY-NEAR | WM 424 | 311 FTE |
| NAT-TCR | Daniel Electric | 5.0 TCR |
| NAT-TCR | RWJ University Hospital New Brunswick | 5.0 TCR |
| NAT-TCR | MPX New Jersey | 5.0 TCR |
| NAT-TCR | Kamps Pallets Baltimore | 5.0 TCR |
| NAT-SIZE | Orlando Lutheran Towers, INC. | 249 FTE |
| NAT-SIZE | City Hall | 249 FTE |
| NAT-SIZE | Mankato Mn - 3050 | 249 FTE |
| NAT-SIZE | OSCOR | 249 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.