Wood cutting saw blades manufacturing · North Carolina
Leitz Tooling Systems LP - North Carolina
Archdale, NC · ~16 workers · 9 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Leitz Tooling Systems LP - North Carolina runs at 32% of its industry's injury rate - far safer than the typical Wood cutting saw blades manufacturing workplace, earning a grade A.
Leitz Tooling Systems LP - North Carolina: 1.0 TCR = 32% of Wood cutting saw blades manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
Leitz Tooling Systems LP - North Carolina safety composite
Leitz Tooling Systems LP - North Carolina scores strongest on total case rate (tcr) (safer than 94% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
78/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- A 1.04 per 100 workers
Safer than 94% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 81% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Leitz Tooling Systems LP - North Carolina held a steady TCR band
Leitz Tooling Systems LP - North Carolina's TCR held near 0.0 from 0.0 in 2016 to 0.0 in 2024. Peak filing year was 2023 at 5.1 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2016=0.0 · 2017=0.0 · 2018=0.0 · 2019=0.0 · 2020=0.0 · 2021=0.0 · 2022=4.2 · 2023=5.1 · 2024=0.0
OSHA ITA Form 300A scorecard
Establishment book 332216 · Archdale, NC AT/BELOW-IND · SMALL
Grade A · TCR 1.0 · 32% of ind
- DART 0.0 DART
- RANK #2/8
- PHOTO GREAT NECK SAW MFGRS…
- BOOK 9y book
- INJ 2 inj
- SIZE ~16 FTE
Nearest TCR peer: GREAT NECK SAW MFGRS INC (0.0 TCR gap)
Read with this employer → · Industry book → · North Carolina employers → · Look up another →
Leitz Tooling Systems LP - North Carolina in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- GREAT NECK SAW
GREAT NECK SAW MFGRS INC
1.1 TCR
- Leuco Tool Cor
Leuco Tool Corporation
1.1 TCR
- American Cutti
American Cutting Edge
1.1 TCR
- This site
Leitz Tooling Systems LP - North Carolina
1 TCR
- Precision Inst
Precision Instruments
1 TCR
What this shows Leitz Tooling Systems LP - North Carolina averages 1.0 TCR (32% of the Wood cutting saw blades manufacturing BLS benchmark).
Leitz Tooling Systems LP - North Carolina TCR series: 2016=0 · 2017=0 · 2018=0 · 2019=0 · 2020=0 · 2021=0 · 2022=4.2 · 2023=5.1 · 2024=0 · BLS 3.3
Where Leitz Tooling Systems LP - North Carolina falls in its industry
174 Wood cutting saw blades manufa establishmentsSafer than 94% of graded establishments in this industry, whose median TCR is 3.6.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 8 Wood cutting saw blades manufa employers in North Carolina.
Leitz Tooling Systems LP - North Carolina has fewer employees than the Wood cutting saw blades manufacturing median and a lower injury rate than the industry's median TCR of 3.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 5.1 | 0.0 | 1 | 0 | 0 |
| 2022 | 4.2 | 0.0 | 1 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332216 · NC · Archdale
174 Wood cutting saw blades manufacturing employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 28 employers in Archdale, NC · 4 cross-state NAT-TCR peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | GREAT NECK SAW MFGRS INC | 1.1 TCR |
| NAICS-TCR | Leuco Tool Corporation | 1.1 TCR |
| NAICS-TCR | Precision Instruments | 1.0 TCR |
| NAICS-TCR | American Cutting Edge | 1.1 TCR |
| STATE-SIZE | Select Genetics NC Field Off 005-0124, 25, 27, 33 | 16 FTE |
| STATE-SIZE | Barnhardt Manufacturing Co Corp Kinston NC | 16 FTE |
| STATE-SIZE | Public Works | 16 FTE |
| STATE-SIZE | Alliance Residential Charlotte | 16 FTE |
| CITY-NEAR | AceAvant Concrete Const. Co. Inc | 315 FTE |
| CITY-NEAR | Hafele America Co. | 304 FTE |
| CITY-NEAR | WHSE 30 | 174 FTE |
| CITY-NEAR | Jowat Corporation | 170 FTE |
| NAT-TCR | Stanley Steemer Great Lakes Inc. | 1.0 TCR |
| NAT-TCR | Saddle Brook | 1.0 TCR |
| NAT-TCR | Industrial Division | 1.0 TCR |
| NAT-TCR | Metal Improvement LLC DBA Curtiss Wright Surface Tech | 1.0 TCR |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.