Sand castings, nonferrous metals (except aluminum), unfinished, manufacturing · Illinois
Louis Meskan Foundry Inc.
Chicago, IL · ~94 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Louis Meskan Foundry Inc. runs at 155% of its industry's injury rate - more dangerous than the typical Sand castings, nonferrous metals (except aluminum), unfinished, manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 5.1
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 29
- recordable injuries tracked
Grade compares Louis Meskan Foundry Inc.'s OSHA Total Case Rate of 5.1 to the Sand castings, nonferrous metals (except aluminum), unfinished, manufacturing BLS benchmark of 3.3 (155% of benchmark) across 9 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Louis Meskan Foundry Inc.'s yearly Total Case Rate, against the 3.3 industry benchmark.
Where Louis Meskan Foundry Inc. falls in its industry
133 Sand castings, nonferrous meta establishmentsSafer than 47% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Illinois alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 12 Sand castings, nonferrous meta employers in Illinois.
Trend analysis for Louis Meskan Foundry Inc.
Between 2016 and 2024, Louis Meskan Foundry Inc.'s Total Case Rate improved from 7.5 to 3.8 recordable injuries per 100 full-time workers, a 50% decrease across 8 years of OSHA reporting.
The safest year on record was 2021, at a TCR of 1.1, while 2023 saw the highest rate, at 11.4, a spread of 10.3 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 9 reporting years, Louis Meskan Foundry Inc. recorded 29 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 9-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 29 injuries, 14 illnesses shown on this page for Louis Meskan Foundry Inc. are sourced from its own 9 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331529 - Sand castings, nonferrous metals (except aluminum), unfinished, manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 159,667 hours worked = 1.25 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Louis Meskan Foundry Inc. (this establishment) | 5.13 | OSHA ITA Form 300A, 9-year avg |
| Nonferrous Castings industry avg | 3.30 | BLS IIF, NAICS 331529 |
| Illinois state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Louis Meskan Foundry Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 3 reportable incidents · 2 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 10 reportable incidents · 7 injuries, 3 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 7 reportable incidents · 3 injuries, 4 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 5 reportable incidents · 4 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 8 reportable incidents · 3 injuries, 5 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.8 | 1.3 | 2 | 1 | 0 |
| 2023 | 11.4 | 6.9 | 7 | 3 | 0 |
| 2022 | 7.8 | 2.2 | 3 | 4 | 0 |
| 2021 | 1.1 | 1.1 | 1 | 0 | 0 |
| 2020 | 2.2 | 2.2 | 2 | 0 | 0 |
| 2019 | 5.0 | 4.0 | 4 | 1 | 0 |
| 2018 | 4.2 | 4.2 | 4 | 0 | 0 |
| 2017 | 3.3 | 3.3 | 3 | 0 | 0 |
| 2016 | 7.5 | 2.8 | 3 | 5 | 0 |
What this grade means for you
Use this grade as a relative read on Louis Meskan Foundry Inc.'s reported OSHA injury record versus its Sand castings, nonferrous metals (except aluminum), unfinished, manufacturing peers, not a verdict on whether any single site is safe today.
- At 155% of the Sand castings, nonferrous metals (except aluminum), unfinished, manufacturing benchmark, Louis Meskan Foundry Inc. reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Sand castings, nonferrous metals (except aluminum), unfinished, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Louis Meskan Foundry Inc.'s safety grade?
How many injuries has Louis Meskan Foundry Inc. reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Illinois, and by nearby establishments in Chicago - a different peer set than the category browse links below.
Similar TCR (~5.1)
Similar size (~94 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.