Cotton ginning machinery manufacturing · Georgia

Lummus Corp. Savannah

Name: Lummus Corp. Savannah Workplace Safety Data
Creator: PlainSafetyScore
License: https://creativecommons.org/publicdomain/zero/1.0/

Savannah, GA · ~79 workers · 2 years of OSHA Injury Tracking Application data.

Compiled by PlainSafetyScore · August 25, 2026

B
Good Safety Record: 2.4
Avg TCR: 3.3
Industry avg: 0
Fatalities

Subscribe to safety-record updates (RSS)

The verdict

Lummus Corp. Savannah runs at 72% of its industry's injury rate - safer than the typical Cotton ginning machinery manufacturing workplace, earning a grade B.

Lummus Corp. Savannah: 2.4 TCR = 72% of Cotton ginning machinery manufacturing BLS 3.3 · 2y Form 300A (see methodology below)

Lummus Corp. Savannah safety composite

Lummus Corp. Savannah scores strongest on total case rate (tcr) (safer than 83% of same-industry peers) and weakest on dart rate (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

63/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR): B 2.37 per 100 workers

Safer than 83% of industry peers
DART rate: D 2.31 per 100 workers

Safer than 50% of industry peers
Fatalities: D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Lummus Corp. Savannah: 1.3 → 3.5 TCR

Peak year 2017 @ 3.5 TCR · DART/TCR 0.97× in 2017

Lummus Corp. Savannah's TCR rose 2.2 from 1.3 in 2016 to 3.5 in 2017. In 2017, DART was 0.97× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 333111 · Savannah, GA AT/BELOW-IND · SMALL

Grade B · TCR 2.4 · 72% of ind

DART 2.3 DART
RANK #6/17
PHOTO Great Plains Manufac…
BOOK 2y book
INJ 4 inj
SIZE ~79 FTE

Nearest TCR peer: Great Plains Manufacturing Inc. - Abilene West (0.0 TCR gap)

Read with this employer → · Industry book → · Georgia employers → · Look up another →

This site

2.4
Great Plains M

2.4
Alamo Group Te

2.4
Production

2.4
Mahindra USA

2.4

What this shows Lummus Corp. Savannah averages 2.4 TCR (72% of the Cotton ginning machinery manufacturing BLS benchmark).

Lummus Corp. Savannah TCR series: 2016=1.3 · 2017=3.5 · BLS 3.3

Where Lummus Corp. Savannah falls in its industry

433 Cotton ginning machinery manuf establishments

Safer than 83% of graded establishments in this industry, whose median TCR is 5.2.

Grade B

More dangerous than peersSafer than peers

Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 17 Cotton ginning machinery manuf employers in Georgia.

Lummus Corp. Savannah (79 employees, TCR 2.4) among 29 same-industry peers, split at the industry median of 82 employees and a TCR of 5.2

Lummus Corp. Savannah has fewer employees than the Cotton ginning machinery manufacturing median and a lower injury rate than the industry's median TCR of 5.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year	TCR	DART	Injuries	Illnesses	Fatalities
2017	3.5	2.3	3	0	0
2016	1.3	1.3	1	0	0

OSHA ITA peer cross-reference

Establishment peer ledger

333111 · GA · Savannah

433 Cotton ginning machinery manufacturing employers nationwide with a credible TCR · 14,941 rated employers in Georgia with headcount on file · 511 employers in Savannah, GA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel	Establishment	Place	Metric
NAICS-TCR	Great Plains Manufacturing Inc. - Abilene West	ABILENE, KS	2.4 TCR
NAICS-TCR	Alamo Group Texas	SEGUIN, TX	2.4 TCR
NAICS-TCR	Production	SELMA, AL	2.4 TCR
NAICS-TCR	Mahindra USA	HOUSTON, TX	2.4 TCR
STATE-SIZE	Middle Georgia Farm	FORT VALLEY	79 FTE
STATE-SIZE	Live Production	BETHLEHEM	79 FTE
STATE-SIZE	Ashburn GP Shelling Plant	ASHBURN	79 FTE
STATE-SIZE	Summit Construction & Development LLC	STONE MOUNTAIN	79 FTE
CITY-NEAR	Gulfstream Aerospace	Savannah	13,245 FTE
CITY-NEAR	Memorial Health University Medical Center	Savannah	3,186 FTE
CITY-NEAR	Savannah College of Art and Design	Savannah	2,369 FTE
CITY-NEAR	Memorial Health University Medical	Savannah	2,056 FTE
NAT-TCR	Garden City Container	Garden City, KS	2.4 TCR
NAT-TCR	Pavestone - MSLP	Tuscumbia, AL	2.4 TCR
NAT-TCR	Sloan Franklin Park	Franklin Park, IL	2.4 TCR
NAT-TCR	Hillside 3/4	Hillside, IL	2.4 TCR
NAT-SIZE	ADS Charlotte	Bessemer City, NC	79 FTE
NAT-SIZE	N and R of Branson LLC	Branson, MO	79 FTE
NAT-SIZE	Cascades - IFC Disposables Inc.	Brownsville, TN	79 FTE
NAT-SIZE	The John Clarke Retirement Center	Middletown, RI	79 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.