School building construction · Minnesota
Mabel Canton Public Schools
Mabel, MN · ~66 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.1
- Avg TCR
- 2.9
- Industry avg
- 0
- Fatalities
The verdict
Mabel Canton Public Schools runs at 107% of its industry's injury rate - about level with the typical School building construction workplace, earning a grade C.
- C
- Average Safety Record
- 3.1
- avg TCR · per 100 workers
- 2.9
- industry benchmark (BLS)
- 4
- recordable injuries tracked
Grade compares Mabel Canton Public Schools's OSHA Total Case Rate of 3.1 to the School building construction BLS benchmark of 2.9 (107% of benchmark) across 3 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Mabel Canton Public Schools's yearly Total Case Rate, against the 2.9 industry benchmark.
Where Mabel Canton Public Schools falls in its industry
6,114 School building construction establishmentsSafer than 30% of graded establishments in this industry, whose median TCR is 1.5.
Narrower to Minnesota alone (the establishments it most directly competes with for workers and contracts): ranked #79 safest of 146 School building construction employers in Minnesota.
Trend analysis for Mabel Canton Public Schools
Between 2020 and 2024, Mabel Canton Public Schools's Total Case Rate worsened from 3.8 to 5.5 recordable injuries per 100 full-time workers, a 44% increase across 4 years of OSHA reporting.
The safest year on record was 2023, at a TCR of 0.0, while 2024 saw the highest rate, at 5.5, a spread of 5.5 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, Mabel Canton Public Schools recorded 4 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 4 injuries shown on this page for Mabel Canton Public Schools are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 236220 - School building construction.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 73,098 hours worked = 5.47 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Mabel Canton Public Schools (this establishment) | 3.09 | OSHA ITA Form 300A, 3-year avg |
| Addition, alteration and renovation general contractors, commercial and institutional building industry avg | 2.90 | BLS IIF, NAICS 236220 |
| Minnesota state avg (all industries) | 5.18 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Mabel Canton Public Schools to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 5.5 | 5.5 | 2 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 3.8 | 3.8 | 2 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Mabel Canton Public Schools's reported OSHA injury record versus its School building construction peers, not a verdict on whether any single site is safe today.
- At 107% of the School building construction benchmark, Mabel Canton Public Schools reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider School building construction sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Mabel Canton Public Schools's safety grade?
How many injuries has Mabel Canton Public Schools reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Minnesota, and by nearby establishments in Mabel - a different peer set than the category browse links below.
Similar TCR (~3.1)
Similar size (~66 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.