Injection molding machinery for plastics manufacturing · California

Magor Mold LLC

San Dimas, CA · ~63 workers · 7 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.6
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Magor Mold LLC runs at 80% of its industry's injury rate - safer than the typical Injection molding machinery for plastics manufacturing workplace, earning a grade B.

Magor Mold LLC: 2.6 TCR = 80% of Injection molding machinery for plastics manufacturing BLS 3.3 · 7y Form 300A (see methodology below)

Magor Mold LLC safety composite

Magor Mold LLC scores strongest on total case rate (tcr) (safer than 56% of same-industry peers) and weakest on dart rate (safer than 19%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

42/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 2.64 per 100 workers

Safer than 56% of industry peers

DART rate
F 3.1 per 100 workers

Safer than 19% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Magor Mold LLC held a steady TCR band

Magor Mold LLC's TCR held near 0.3 from 2.8 in 2017 to 3.1 in 2024. Peak filing year was 2021 at 5.0 TCR. In 2024, DART was 1.17× this establishment's average TCR (severity share of cases).

2017=2.8 · 2018=2.6 · 2019=3.2 · 2020=1.7 · 2021=5.0 · 2023=0.0 · 2024=3.1

OSHA ITA Form 300A scorecard

Establishment book 333249 · San Dimas, CA AT/BELOW-IND · SMALL

Grade B · TCR 2.6 · 80% of ind

  • DART 3.1 DART
  • RANK #12/27
  • PHOTO Freund-Vector Corpor…
  • BOOK 7y book
  • INJ 10 inj
  • SIZE ~63 FTE

Nearest TCR peer: Freund-Vector Corporation (0.0 TCR gap)

Read with this employer → · Industry book → · California employers → · Look up another →

Magor Mold LLC in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Magor Mold LLC averages 2.6 TCR (80% of the Injection molding machinery for plastics manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Magor Mold LLC TCR series: 2017=2.8 · 2018=2.6 · 2019=3.2 · 2020=1.7 · 2021=5 · 2023=0 · 2024=3.1 · BLS 3.3

Where Magor Mold LLC falls in its industry

448 Injection molding machinery fo establishments

Safer than 56% of graded establishments in this industry, whose median TCR is 3.0.

More dangerous than peersSafer than peers

Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #12 safest of 27 Injection molding machinery fo employers in California.

Magor Mold LLC (63 employees, TCR 2.6) among 29 same-industry peers, split at the industry median of 70 employees and a TCR of 3.0 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600800 0246810 Average employees Total Case Rate Magor Mold LLC
Magor Mold LLC (63 employees, TCR 2.6) among 29 same-industry peers, split at the industry median of 70 employees and a TCR of 3.0

Magor Mold LLC has fewer employees than the Injection molding machinery for plastics median and a lower injury rate than the industry's median TCR of 3.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 3.1 3.1 2 0 0
2023 0.0 0.0 0 0 0
2021 5.0 3.4 1 2 0
2020 1.7 0.0 1 0 0
2019 3.2 1.6 2 0 0
2018 2.6 2.6 2 0 0
2017 2.8 0.0 2 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

333249 · CA · San Dimas

448 Injection molding machinery for plastics manufacturing employers nationwide with a credible TCR · 51,834 rated employers in California with headcount on file · 73 employers in San Dimas, CA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Freund-Vector Corporation 2.6 TCR
NAICS-TCR AGS Technology Inc 2.6 TCR
NAICS-TCR Swainsboro 2.6 TCR
NAICS-TCR Pyrotek Aurora 2.7 TCR
STATE-SIZE VF - Lodi 63 FTE
STATE-SIZE Valley Ventures, Inc. 63 FTE
STATE-SIZE Goossen Farms Inc 63 FTE
STATE-SIZE NGW, LLC 63 FTE
CITY-NEAR ROCKWELL DRYWALL, INC. 1,302 FTE
CITY-NEAR LOCATION 15008 796 FTE
CITY-NEAR Gilead Sciences, Inc. 686 FTE
CITY-NEAR Raging Waters Los Angeles 473 FTE
NAT-TCR Winchester VA Yard 2.6 TCR
NAT-TCR Homer AK Yard 2.6 TCR
NAT-TCR Cochecton Mills Inc 2.6 TCR
NAT-TCR Stericycle - Warren,OH 2.6 TCR
NAT-SIZE Mueller Water Conditioning, Inc 63 FTE
NAT-SIZE Northstar Asphalt, Inc. 63 FTE
NAT-SIZE K Construction LLC DBA K CON 63 FTE
NAT-SIZE Riverview 63 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.