Chain Link Fence Manufacturing · Texas

Master Halco - Dallas Mfg 031

Dallas, TX · ~51 workers · 2 years of OSHA Injury Tracking Application data.

C
Average Safety Record
2.8
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Master Halco - Dallas Mfg 031 runs at 83% of its industry's injury rate - about level with the typical Chain Link Fence Manufacturing workplace, earning a grade C.

Master Halco - Dallas Mfg 031: 2.8 TCR = 83% of Chain Link Fence Manufacturing BLS 3.3 · 2y Form 300A (see methodology below)

Master Halco - Dallas Mfg 031 safety composite

Master Halco - Dallas Mfg 031 scores strongest on total case rate (tcr) (safer than 64% of same-industry peers) and weakest on dart rate (safer than 26%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

47/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 2.75 per 100 workers

Safer than 64% of industry peers

DART rate
F 3.66 per 100 workers

Safer than 26% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Master Halco - Dallas Mfg 031: 1.8 → 3.7 TCR

Peak year 2024 @ 3.7 TCR · DART/TCR 1.33× in 2024

Master Halco - Dallas Mfg 031's TCR rose 1.8 from 1.8 in 2022 to 3.7 in 2024. In 2024, DART was 1.33× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332618 · Dallas, TX AT/BELOW-IND · SMALL

Grade C · TCR 2.8 · 83% of ind

  • DART 3.7 DART
  • RANK #17/29
  • PHOTO McEwen Plant 2
  • BOOK 2y book
  • INJ 3 inj
  • SIZE ~51 FTE

Nearest TCR peer: McEwen Plant 2 (0.0 TCR gap)

Read with this employer → · Industry book → · Texas employers → · Look up another →

Master Halco - Dallas Mfg 031 in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Master Halco - Dallas Mfg 031 averages 2.8 TCR (83% of the Chain Link Fence Manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Master Halco - Dallas Mfg 031 TCR series: 2022=1.8 · 2024=3.7 · BLS 3.3

Where Master Halco - Dallas Mfg 031 falls in its industry

270 Chain Link Fence Manufacturing establishments

Safer than 64% of graded establishments in this industry, whose median TCR is 3.7.

More dangerous than peersSafer than peers

Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #17 safest of 29 Chain Link Fence Manufacturing employers in Texas.

Master Halco - Dallas Mfg 031 (51 employees, TCR 2.8) among 29 same-industry peers, split at the industry median of 60 employees and a TCR of 3.7 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400500 05101520 Average employees Total Case Rate Master Halco - Dallas Mfg 031
Master Halco - Dallas Mfg 031 (51 employees, TCR 2.8) among 29 same-industry peers, split at the industry median of 60 employees and a TCR of 3.7

Master Halco - Dallas Mfg 031 has fewer employees than the Chain Link Fence Manufacturing median and a lower injury rate than the industry's median TCR of 3.7. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 3.7 3.7 2 0 0
2022 1.8 1.8 1 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332618 · TX · Dallas

270 Chain Link Fence Manufacturing employers nationwide with a credible TCR · 38,394 rated employers in Texas with headcount on file · 2,187 employers in Dallas, TX · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR McEwen Plant 2 2.7 TCR
NAICS-TCR Bright Coop, Inc 2.8 TCR
NAICS-TCR Ottawa Products 2.7 TCR
NAICS-TCR SSW Premier 2.7 TCR
STATE-SIZE Moore County Gin 51 FTE
STATE-SIZE Goldsmith 51 FTE
STATE-SIZE Titan Directional Drilling 51 FTE
STATE-SIZE Coastal Flow Liquid Measurement, Inc. 51 FTE
CITY-NEAR AECOM DCS (US Operations) 15,100 FTE
CITY-NEAR Rexel USA, Inc 8,356 FTE
CITY-NEAR 1 CHILDRENS MEDICAL CENTER OF DALLAS 6,147 FTE
CITY-NEAR HDQ - Headquarters 5,764 FTE
NAT-TCR 7691-Pdllc-Immaculata University 2.8 TCR
NAT-TCR Contrast Mechanical, Inc 2.8 TCR
NAT-TCR Madico, Inc 2.8 TCR
NAT-TCR Fabio Inc. 2.8 TCR
NAT-SIZE Trusted Delivery Solutions LLC 51 FTE
NAT-SIZE Parksite 115 51 FTE
NAT-SIZE Cardiology Associates - Jim Moran Building 51 FTE
NAT-SIZE New York Field Office 51 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2022. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.