Employer · Minnesota
Max-Tech and Maxxon Corporation
Hamel, MN · ~44 workers · 8 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 1.2
- Avg TCR
- 2.2
- Industry avg
- 0
- Fatalities
The verdict
Max-Tech and Maxxon Corporation runs at 55% of its industry's injury rate - safer than the typical industry workplace, earning a grade B.
Max-Tech and Maxxon Corporation: 1.2 TCR = 55% of industry BLS 2.2 · 8y Form 300A (see methodology below)
Max-Tech and Maxxon Corporation safety composite
Max-Tech and Maxxon Corporation scores strongest on total case rate (tcr) (safer than 89% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
68/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- B 1.22 per 100 workers
Safer than 89% of industry peers
- DART rate
- C 1.52 per 100 workers
Safer than 56% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Max-Tech and Maxxon Corporation: 0.0 → 1.5 TCR
Peak year 2019 @ 6.3 TCR · DART/TCR 1.25× in 2024
Max-Tech and Maxxon Corporation's TCR rose 1.5 from 0.0 in 2017 to 1.5 in 2024. Peak filing year was 2019 at 6.3 TCR. In 2024, DART was 1.25× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 423390 · Hamel, MN AT/BELOW-IND · SMALL
Grade B · TCR 1.2 · 55% of ind
- DART 1.5 DART
- RANK #1/6
- PHOTO Fort Worth Branch
- BOOK 8y book
- INJ 3 inj
- SIZE ~44 FTE
Nearest TCR peer: Fort Worth Branch (0.0 TCR gap)
Read with this employer → · Industry book → · Minnesota employers → · Look up another →
Max-Tech and Maxxon Corporation in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Fort Worth Bra
Fort Worth Branch
1.3 TCR
- 566 - ROUND RO
566 - ROUND ROCK-INT BRANCH
1.3 TCR
- 535 - ELIZABET
535 - ELIZABETH-INT BRANCH
1.3 TCR
- This site
Max-Tech and Maxxon Corporation
1.2 TCR
- Palmer-Donavin
Palmer-Donavin Columbus
1.2 TCR
What this shows Max-Tech and Maxxon Corporation averages 1.2 TCR (55% of the industry BLS benchmark).
Max-Tech and Maxxon Corporation TCR series: 2017=0 · 2018=0 · 2019=6.3 · 2020=0 · 2021=0 · 2022=0 · 2023=2 · 2024=1.5 · BLS 2.2
Where Max-Tech and Maxxon Corporation falls in its industry
168 industry establishmentsSafer than 89% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Minnesota alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 6 industry employers in Minnesota.
Max-Tech and Maxxon Corporation has more employees than the industry median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 1.5 | 1.5 | 1 | 0 | 0 |
| 2023 | 2.0 | 0.0 | 1 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 6.3 | 3.1 | 1 | 1 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
423390 · MN · Hamel
168 industry employers nationwide with a credible TCR · 15,828 rated employers in Minnesota with headcount on file · 11 employers in Hamel, MN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Fort Worth Branch | 1.3 TCR |
| NAICS-TCR | 566 - ROUND ROCK-INT BRANCH | 1.3 TCR |
| NAICS-TCR | Palmer-Donavin Columbus | 1.2 TCR |
| NAICS-TCR | 535 - ELIZABETH-INT BRANCH | 1.3 TCR |
| STATE-SIZE | West River | 44 FTE |
| STATE-SIZE | Monticello Training Ctr-LL | 44 FTE |
| STATE-SIZE | Water Treatment Facility | 44 FTE |
| STATE-SIZE | WasteWater Treatment Facility | 44 FTE |
| CITY-NEAR | Loram Fleet/Operations | 590 FTE |
| CITY-NEAR | Loram Maintenance of Way (Fleet Operations) | 515 FTE |
| CITY-NEAR | Loram Maintenance of Way (Corporate Office) | 431 FTE |
| CITY-NEAR | Corporate/Shop | 392 FTE |
| NAT-TCR | S09088 - Monroe County MRF | 1.2 TCR |
| NAT-TCR | Metal Sales MC Independence | 1.2 TCR |
| NAT-TCR | Maryland Campus | 1.2 TCR |
| NAT-TCR | Franklin Fastener | 1.2 TCR |
| NAT-SIZE | Zimbrick Chevrolet | 44 FTE |
| NAT-SIZE | Paris Machining Company | 44 FTE |
| NAT-SIZE | Fire Protection | 44 FTE |
| NAT-SIZE | JEM America Corp. | 44 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.