Coating metals and metal products for the trade · Rhode Island

MCM Technologies, Inc.

Providence, RI · ~56 workers · 5 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.5
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

MCM Technologies, Inc. runs at 76% of its industry's injury rate - safer than the typical Coating metals and metal products for the trade workplace, earning a grade B.

MCM Technologies, Inc.: 2.5 TCR = 76% of Coating metals and metal products for the trade BLS 3.3 · 5y Form 300A (see methodology below)

MCM Technologies, Inc. safety composite

MCM Technologies, Inc. scores strongest on total case rate (tcr) (safer than 69% of same-industry peers) and weakest on dart rate (safer than 15%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

46/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 2.51 per 100 workers

Safer than 69% of industry peers

DART rate
F 5.56 per 100 workers

Safer than 15% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

MCM Technologies, Inc.: 2.0 → 11428.6 TCR

Peak year 2024 @ 11428.6 TCR · DART/TCR 0× in 2024

MCM Technologies, Inc.'s TCR rose 11426.5 from 2.0 in 2020 to 11428.6 in 2024. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332812 · Providence, RI AT/BELOW-IND · SMALL

Grade B · TCR 2.5 · 76% of ind

  • DART 0.0 DART
  • RANK #3/6
  • PHOTO Industrial Finishing…
  • BOOK 5y book
  • INJ 5 inj
  • SIZE ~56 FTE

Nearest TCR peer: Industrial Finishing Services (Deer Creek) (0.0 TCR gap)

Read with this employer → · Industry book → · Rhode Island employers → · Look up another →

MCM Technologies, Inc. in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows MCM Technologies, Inc. averages 2.5 TCR (76% of the Coating metals and metal products for the trade BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

MCM Technologies, Inc. TCR series: 2020=2 · 2021=2.5 · 2022=0 · 2023=5.6 · 2024=11428.6 · BLS 3.3

Where MCM Technologies, Inc. falls in its industry

646 Coating metals and metal produ establishments

Safer than 69% of graded establishments in this industry, whose median TCR is 3.9.

More dangerous than peersSafer than peers

Narrower to Rhode Island alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 6 Coating metals and metal produ employers in Rhode Island.

MCM Technologies, Inc. (56 employees, TCR 2.5) among 29 same-industry peers, split at the industry median of 58 employees and a TCR of 3.9 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600 0510152025 Average employees Total Case Rate MCM Technologies, Inc.
MCM Technologies, Inc. (56 employees, TCR 2.5) among 29 same-industry peers, split at the industry median of 58 employees and a TCR of 3.9

MCM Technologies, Inc. has fewer employees than the Coating metals and metal products for th median and a lower injury rate than the industry's median TCR of 3.9. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 11428.6 0.0 1 1 0
2023 5.6 5.6 2 0 0
2022 0.0 0.0 0 0 0
2021 2.5 0.0 1 0 0
2020 2.0 0.0 1 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332812 · RI · Providence

646 Coating metals and metal products for the trade employers nationwide with a credible TCR · 1,610 rated employers in Rhode Island with headcount on file · 209 employers in Providence, RI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Industrial Finishing Services (Deer Creek) 2.5 TCR
NAICS-TCR Fort Wayne - CR 2.5 TCR
NAICS-TCR Kronis Coatings 2.5 TCR
NAICS-TCR Millennium Galvanizing 2.5 TCR
STATE-SIZE Site Specific 56 FTE
STATE-SIZE Technic, Inc. Engineered Powders Division 56 FTE
STATE-SIZE Contempo Card Company 56 FTE
STATE-SIZE Ridco Casting Company 56 FTE
CITY-NEAR Rhode Island Hospital 7,817 FTE
CITY-NEAR Point32Health Providence 4,440 FTE
CITY-NEAR The Miriam Hospital 3,204 FTE
CITY-NEAR Women & Infants Hospital 2,195 FTE
NAT-TCR Lewiston Terminal 2.5 TCR
NAT-TCR Formulated Solutions, LLC 2.5 TCR
NAT-TCR Jefferson Cocke County Utility District 2.5 TCR
NAT-TCR Chicago Downers Grove 2.5 TCR
NAT-SIZE Apel Steel Corporation 56 FTE
NAT-SIZE ACS Steel Company, LLC 56 FTE
NAT-SIZE Unholtz-Dickie Corporation 56 FTE
NAT-SIZE 451 Pepsi Road 56 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.